Had a call to cut and bend some tread/diamond/checker plate. The DTHC has been working great lately so I took a few seconds of video, figured I'd share and see if it coincides with how your system works or whatever.
Video 1 of the z axis.
Video 2 of the controller.
Couple short videos of DTHC working on tread plate
-
Deezl Smoke
- 2.5 Star Member
- Posts: 235
- Joined: Mon May 18, 2020 3:03 pm
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11443
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Couple short videos of DTHC working on tread plate
It look like you've got your height control dialed in! Thanks for the videos.
David
David
-
TJS
- 4 Star Member
- Posts: 832
- Joined: Wed Nov 26, 2014 1:22 pm
- Location: Fairfield, CT.
- Contact:
Re: Couple short videos of DTHC working on tread plate
Deezl,
What is your DTHC response time set to for this.
What is your DTHC response time set to for this.
-
Deezl Smoke
- 2.5 Star Member
- Posts: 235
- Joined: Mon May 18, 2020 3:03 pm
Re: Couple short videos of DTHC working on tread plate
I will have to open the program and have a look. It is whatever Arclight set it at from their factory. If I get the chance, I will take a picture of the settings page later.
-
Deezl Smoke
- 2.5 Star Member
- Posts: 235
- Joined: Mon May 18, 2020 3:03 pm
Re: Couple short videos of DTHC working on tread plate
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
TJS
- 4 Star Member
- Posts: 832
- Joined: Wed Nov 26, 2014 1:22 pm
- Location: Fairfield, CT.
- Contact:
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11443
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Couple short videos of DTHC working on tread plate
Thanks for sharing those screen shots.
David
David
