New to Site

[cccweld]

Joined this site in hopes to get answers to various questions about our CNC Plasma Table.

We currently have issues with our table but the main concern is the alignment of the servos.

Thanks for allowing us to join in the forum!

[Joe Jones]

Hi, tell me what table you have. It is difficult to answer questions without more information.

Joe

[cccweld]

We have an Apache Industries from Coffeyville KS

[cccweld]

The servos are out of alignment and of course the table does not cut straight. We also have issues with the THC. Never know when it is going to work or not. We use Mach 3 software.

[Joe Jones]

We have an Apache Industries from Coffeyville KS

Ah. I know nothing about your machine. Perhaps others can be of help.

Joe

[adbuch]

Joined this site in hopes to get answers to various questions about our CNC Plasma Table.

We currently have issues with our table but the main concern is the alignment of the servos.

Thanks for allowing us to join in the forum!

You might try posting your questions at the
CNC Plasma Cutters General Forum located here.

https://plasmaspider.com/viewforum.php?f=3


David

[weldguy]

Not familiar with your setup but it must have limit switches. Is there a button for each axis that sends the gantry to the limits switches?