Newbie from Ocala florida
-
Vwmikey
- 1/2 Star Member
- Posts: 1
- Joined: Wed Oct 23, 2024 7:23 pm
Newbie from Ocala florida
Just wanted too say what's up. Going to learn to powder coat.
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3877
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Newbie from Ocala florida
You will enjoy it!
Joe
Joe
FREE DesignEdge Training Online
Two hobby shops (9,790 sq. ft.) full of machines and tools
Two hobby shops (9,790 sq. ft.) full of machines and tools
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11441
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Newbie from Ocala florida
Hi Vwmikey. I assume from your name that you are into VW's. Do you have a plasma table that you are using to cut the parts you want to powder coat?
If so, what kind of table do you have - and what software do you use to do your designs? There is a powder coating section of this forum that you may find useful.
viewforum.php?f=82
David
If so, what kind of table do you have - and what software do you use to do your designs? There is a powder coating section of this forum that you may find useful.
viewforum.php?f=82
David
