It is currently Mon Nov 12, 2018 7:42 pm

 

Our Youtube Channel

Star-Lab plasma table discussion forum
BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Our Youtube Channel

Postby BTA Plasma » Sun Nov 12, 2017 9:07 pm

Please see our youtube channel for some quick software training videos. We have many videos in the works.

https://www.youtube.com/channel/UC8H3H9 ... Wmcbl7Vh-Q

User avatar
_Ogre
Posts: 530
Joined: Sun Sep 15, 2013 4:26 pm
Location: Motown

Re: Our Youtube Channel

Postby _Ogre » Mon Nov 13, 2017 1:07 pm

nice work BTA :mrgreen:

if you'd like to post our rotacut videos on your channel, you are welcome to use them
only 2 with low res but they get the point across

https://www.youtube.com/watch?v=Ilc_ldF7eLE

https://www.youtube.com/watch?v=8D7JpWrDDaM

the rotocut is the reason we went with bta
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley :mrgreen: how cool!

User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 500
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Our Youtube Channel

Postby Scratch » Mon Nov 13, 2017 4:17 pm

BTA Plasma wrote:Please see our youtube channel for some quick software training videos. We have many videos in the works.

https://www.youtube.com/channel/UC8H3H9 ... Wmcbl7Vh-Q


Is this Matt from Bulltear? The guy from Minnesota?
I think I might have made you some parts before you got your tables...?
I think I'm the oldest 10 year old boy on the forum...

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Mon Nov 13, 2017 4:20 pm

Matt here. I am one of the folks that use the BTA plasma profile. How are you buddy? Machine been cutting good for you? Ready for an update?

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Mon Nov 13, 2017 4:22 pm

_Ogre wrote:nice work BTA :mrgreen:

if you'd like to post our rotacut videos on your channel, you are welcome to use them
only 2 with low res but they get the point across

https://www.youtube.com/watch?v=Ilc_ldF7eLE

https://www.youtube.com/watch?v=8D7JpWrDDaM

the rotocut is the reason we went with bta

Thank you! Yes that rotary that we built was the base idea for the Rotacut II with a 2,5" through hole.

User avatar
_Ogre
Posts: 530
Joined: Sun Sep 15, 2013 4:26 pm
Location: Motown

Re: Our Youtube Channel

Postby _Ogre » Tue Nov 14, 2017 12:35 pm

our cnc plasma cutting is 99% exhaust work: tube copes, holes in tubes and flanges, thus we need the inside of the tube as clean as the outside
if you look at the video, notice we use a coolant pump in the center hole of the rotacut chuck to keep dross out of the inside of the tube
coolant (table water) pump is a $15 aquarium pump that we've had since we set the table up 5 years ago
rotacut is the main use/purchase for our table, anything beyond that is a bonus, now we cut a lot of ss flanges and custom turbo flanges
works great for the investment we have in it

thanks matt for a great product :mrgreen:
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley :mrgreen: how cool!

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Thu Nov 16, 2017 11:03 am

Yes that was a very good idea the coolant pump.

Pat4rd
Posts: 82
Joined: Thu Apr 06, 2017 6:32 pm

Re: Our Youtube Channel

Postby Pat4rd » Tue Dec 05, 2017 9:40 pm

Bta thank you for the video, I'm wanting to upgrade my table and I'm doing my homework on which one to go with! getting all of this info is great!
Millermatic 252
Hypertherm 45xp machine torch
Eagle 4x4
Mach3, sheetcam, adobe il, inkscape
Proma 150 floating head, Quincy 5hp 60gal, 3 stage dryer.

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Thu Dec 07, 2017 10:10 am

Yes that is the best method of purchasing a machine on the market. The market is flooded with different level of machines. We are definitely biased.

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Wed Feb 07, 2018 9:48 pm

Matt explaining the Limit and Collision systems on the 2018 Star Lab CNC systems . The Proton Z axis and/or the Collision system is available for retro fit on any year Star Lab CNC https://www.youtube.com/watch?v=mTGNbTq5iL8

tylerd
Posts: 89
Joined: Fri Jan 20, 2017 3:25 am

Re: Our Youtube Channel

Postby tylerd » Thu Feb 08, 2018 11:36 pm

Sweet !!!
Bulltear 4x8
PN200 Pendant
Linux Command CNC
Hypertherm PM 85
C&CNC Bladerunner Servo
DTHC IV Feather Touch
HyT-Connect DCP-01
Sheetcam Inkscape QCAD

djreiswig
Elite Contributing Member
Elite Contributing Member
Posts: 358
Joined: Thu Nov 19, 2015 10:02 pm

Re: Our Youtube Channel

Postby djreiswig » Fri Feb 09, 2018 1:24 pm

Matt,
I sent you some videos of the flame cutter on my table a while back. I do not see them on the YouTube channel yet.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)

Bigrhamr
Posts: 148
Joined: Fri Jan 15, 2010 7:32 pm

Re: Our Youtube Channel

Postby Bigrhamr » Fri Feb 09, 2018 9:02 pm

djreiswig wrote:Matt,
I sent you some videos of the flame cutter on my table a while back. I do not see them on the YouTube channel yet.


Are they posted any where else? I have a new Star Lab coming and want to add an oxy fuel torch.

djreiswig
Elite Contributing Member
Elite Contributing Member
Posts: 358
Joined: Thu Nov 19, 2015 10:02 pm

Re: Our Youtube Channel

Postby djreiswig » Fri Feb 09, 2018 11:14 pm

Sorry. No. Matt asked me to send him something, since they have flame accessories but no videos. He gave me some help when I was adding mine so I sent him a couple videos. I'm not sure why he hasn't posted them. I sent them to him over a year ago.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Sun Feb 11, 2018 9:08 am

Matt here, will look for those videos. I do recall them and If I remember correctly you did some 1 inch or 3/4 steel. Thank you for sending them in.

djreiswig
Elite Contributing Member
Elite Contributing Member
Posts: 358
Joined: Thu Nov 19, 2015 10:02 pm

Re: Our Youtube Channel

Postby djreiswig » Sun Feb 11, 2018 4:18 pm

Yes. It was 3/4" & 1".
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Mon Feb 12, 2018 12:09 pm

So that was back in 2016 and the download is not active anymore. The videos were downloaded and the hard drive they were put on was one that fell victim to a lightning strike. If you could resend them I will do my best to promptly put them up on youtube.

djreiswig
Elite Contributing Member
Elite Contributing Member
Posts: 358
Joined: Thu Nov 19, 2015 10:02 pm

Re: Our Youtube Channel

Postby djreiswig » Mon Feb 12, 2018 1:24 pm

What is the preferred way to get them to you? I don't remember how I did it last time.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Mon Feb 12, 2018 2:41 pm

It appears you used some kind of file service or cloud

djreiswig
Elite Contributing Member
Elite Contributing Member
Posts: 358
Joined: Thu Nov 19, 2015 10:02 pm

Re: Our Youtube Channel

Postby djreiswig » Tue Feb 13, 2018 8:25 am

Matt,
I sent you a PM with the download links.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Tue Feb 13, 2018 10:48 am

1 of them worked. It was with 1" steel. Uploading to YouTube now.

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Tue Feb 13, 2018 1:12 pm


djreiswig
Elite Contributing Member
Elite Contributing Member
Posts: 358
Joined: Thu Nov 19, 2015 10:02 pm

Re: Our Youtube Channel

Postby djreiswig » Tue Feb 13, 2018 1:21 pm

Excellent. We're you able to download the other 2 videos?
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Tue Feb 13, 2018 1:38 pm

2nd one failed, 3rd one said not found.

BTA Plasma
Elite Contributing Member
Elite Contributing Member
Posts: 471
Joined: Thu May 12, 2011 4:28 pm

Re: Our Youtube Channel

Postby BTA Plasma » Tue Feb 13, 2018 2:20 pm



Return to “Star-Lab”

Who is online

Users browsing this forum: No registered users and 3 guests

Easyscriber engrave attachment for Hypertherm torch's