Beat up copper look
-
- 1.5 Star Member
- Posts: 37
- Joined: Tue Dec 29, 2015 8:41 pm
Beat up copper look
Has anyone ever done anything like this? Looking for ideas on paint options.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Beat up copper look
I get a similar look by using Copper FX as a base and then misting Pewter FX over it and let sit until the color darkens to where I want it. It will cause the copper FX to turn brownish red. I also get a similar look with some of their other products like Rust FX.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 1.5 Star Member
- Posts: 37
- Joined: Tue Dec 29, 2015 8:41 pm
Re: Beat up copper look
Is this on metal with mill scale or do you use colled rolled?
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Beat up copper look
Use only cold rolled, soak in muriatic acid to remove dross and clean, then polish with 120 grit flap disc. The add your patina.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 1.5 Star Member
- Posts: 37
- Joined: Tue Dec 29, 2015 8:41 pm
Re: Beat up copper look
I'm glad you brought up the acid bath. What do you use for a tub and how long will the muriatic hold its potency? Grinding slag is too time consuming and adds a ton of debris to find its way to my paint.
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Beat up copper look
I use a DEE ZEE tool storage box part number 6537P. You can find it on Amazon for $99 or less. It is 40' x 28' x 18' The inside is a little smaller. I cut one piece that's 36' x 20' and it fits with room to spare. It has a hinged lid with a rubber seal that keeps the smell in. The lid is also made to be locked with a pad lock. I mix my acid 50/50. I buy a 5 gallon bucket for $30 and add to 5 gallons of water. My first batch lasted a year. This batch is now 2 months old and working as good as it did the first day and I use it daily. Hope this helped.wlockwood23 wrote:I'm glad you brought up the acid bath. What do you use for a tub and how long will the muriatic hold its potency? Grinding slag is too time consuming and adds a ton of debris to find its way to my paint.
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1675
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Beat up copper look
Impressive, that tank is bigger than my shop!!!It is 40' x 28' x 18' The inside is a little smaller.
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2.5 Star Member
- Posts: 162
- Joined: Thu Oct 16, 2014 6:10 pm
Re: Beat up copper look
I only get this look when I need it to be smooth and shiny. I would use Copper FX from SteelFX and have the metal a little "disressed" and wait a bit longer before rinsing. I use cold rolled as well.
- steelfx
- 4 Star Elite Contributing Member
- Posts: 768
- Joined: Sat Oct 10, 2009 12:09 am
- Location: St. George, Utah
- Contact:
Re: Beat up copper look
Great Answer Above:
Unread post by littlefatbuddy » Sat Jun 25, 2016 6:26 pm
"I would use Copper FX from SteelFX and have the metal a little "distressed" and wait a bit longer before rinsing. I use cold rolled as well."
(from Bill)...RUST F/X™ is also a good choice, but the real "look" in the image is from distressing the steel prior to adding a patina. I'd consider using a matte clear after the patina & you'll be home free!
Thanks,
Bill
Unread post by littlefatbuddy » Sat Jun 25, 2016 6:26 pm
"I would use Copper FX from SteelFX and have the metal a little "distressed" and wait a bit longer before rinsing. I use cold rolled as well."
(from Bill)...RUST F/X™ is also a good choice, but the real "look" in the image is from distressing the steel prior to adding a patina. I'd consider using a matte clear after the patina & you'll be home free!
Thanks,
Bill
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Beat up copper look
If you are soaking and muriatic for the dross anyway, it seems to me it doesn't matter if you start with cold rolled or hot rolled. The muriatic attic acid will remove the mill scale from the hot rolled just as easy as it removes the dross from the cold rolled. Isn't this correct?little blue choo wrote:Use only cold rolled, soak in muriatic acid to remove dross and clean, then polish with 120 grit flap disc. The add your patina.
Rick
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
- steelfx
- 4 Star Elite Contributing Member
- Posts: 768
- Joined: Sat Oct 10, 2009 12:09 am
- Location: St. George, Utah
- Contact:
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Beat up copper look
Thanks Bill! I received my super starter kit today. I am looking forward to learning how to use it!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
- steelfx
- 4 Star Elite Contributing Member
- Posts: 768
- Joined: Sat Oct 10, 2009 12:09 am
- Location: St. George, Utah
- Contact:
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Beat up copper look
I use the cold rolled because it is cheaper and it seams to clean up a lot quicker with less effort and time is money my friend.motoguy wrote:If you are soaking and muriatic for the dross anyway, it seems to me it doesn't matter if you start with cold rolled or hot rolled. The muriatic attic acid will remove the mill scale from the hot rolled just as easy as it removes the dross from the cold rolled. Isn't this correct?little blue choo wrote:Use only cold rolled, soak in muriatic acid to remove dross and clean, then polish with 120 grit flap disc. The add your patina.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Beat up copper look
I would love to:
1) find CR available locally
2) cheaper than HR!
Color me green with envy. At some point I want to be burning through enough to justify a delivery...then I can get CR! Lol
1) find CR available locally
2) cheaper than HR!
Color me green with envy. At some point I want to be burning through enough to justify a delivery...then I can get CR! Lol
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam