Thanks for the updates made to the site, all very good, even on the phone it works well.
I was just adding some photos to a post but seemed to struggle until I realized the needed resizing to get the green tick in the status box, is there a size limit? could maybe do with a note adding in the attachment box to say about it.
It's great being able to drag images now though,
Cheers
Front page of site messed up
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Front page of site messed up
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- admin
- Site Admin
- Posts: 366
- Joined: Thu Jul 03, 2008 5:12 pm
- Location: Out In The Shop
- Contact:
Re: Front page of site messed up
Thanks I am glad you like it. Yes, there is a 2mb file size limit and I will see about adding that information to the attachment upload window. Have a great weekend.SeanP wrote:Thanks for the updates made to the site, all very good, even on the phone it works well.
I was just adding some photos to a post but seemed to struggle until I realized the needed resizing to get the green tick in the status box, is there a size limit? could maybe do with a note adding in the attachment box to say about it.
It's great being able to drag images now though,
Cheers
Admin
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2642
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Front page of site messed up
It also should say PLEASE make them smaller then MAX as it takes up a lot of allowed space to post 1.9mb picture when a 100kb picture would show off your project just as well! Just my $0.02admin wrote:Thanks I am glad you like it. Yes, there is a 2mb file size limit and I will see about adding that information to the attachment upload window. Have a great weekend.SeanP wrote:Thanks for the updates made to the site, all very good, even on the phone it works well.
I was just adding some photos to a post but seemed to struggle until I realized the needed resizing to get the green tick in the status box, is there a size limit? could maybe do with a note adding in the attachment box to say about it.
It's great being able to drag images now though,
Cheers
Admin
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Larry
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Front page of site messed up
It's quite good to be able to zoom in to see detail on pictures though Larry.
I think it's about right really, 2mb files don't appear to be allowed, it looks more like 500kb max I think which you can still get a decent size pic to upload, the resizing that the page does works well and then click the image to zoom in at full size.
Looks good to me![Wink ;)](./images/smilies/icon_e_wink.gif)
I think it's about right really, 2mb files don't appear to be allowed, it looks more like 500kb max I think which you can still get a decent size pic to upload, the resizing that the page does works well and then click the image to zoom in at full size.
Looks good to me
![Wink ;)](./images/smilies/icon_e_wink.gif)
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- admin
- Site Admin
- Posts: 366
- Joined: Thu Jul 03, 2008 5:12 pm
- Location: Out In The Shop
- Contact:
Re: Front page of site messed up
The board is set to a max of 2MB however I tried for myself and ran into trouble once I began to exceed 1MB
This is likely limited at a higher level on our current server.
I am preparing to switch to a more reliable server here shortly and will wait until then to do so.
This is likely limited at a higher level on our current server.
I am preparing to switch to a more reliable server here shortly and will wait until then to do so.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Front page of site messed up
That's strange maybe there is something with my files, sometimes there is a error symbol rather than the tick, it's no problem anyway.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- admin
- Site Admin
- Posts: 366
- Joined: Thu Jul 03, 2008 5:12 pm
- Location: Out In The Shop
- Contact:
Re: Front page of site messed up
I appreciate that and its not a big deal but I have had a few reports of small issues with file uploads so I will be looking into it after the server swap regardless. Thanks for the added info Sean.SeanP wrote:That's strange maybe there is something with my files, sometimes there is a error symbol rather than the tick, it's no problem anyway.