Headed to CommieFornia soon
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Headed to CommieFornia soon
I am taking this route to CommieFornia very soon. I will carry four of my six-inch rail lift kits for the PlasmaCam and Samson 510 tables with me, in case someone along the route wants one at a "Dewdrop INN" price with NO SHIPPING charges! You can still use the table as normal, but if you HAVE or BUY the $998.00 (CSB) Customizable Size Upgrade directly from PlasmaCam for your DesignEdge software license, then you will be able to take full advantage of the six inches of Z travel, and a whole new world of possibilities will open up for you!
I will also post the return trip below (soon) which will happen probably in the first or second week of February. It will be slightly different. Send me an email with any questions - addmenow (at) mail (dot) com
Joe
I will also post the return trip below (soon) which will happen probably in the first or second week of February. It will be slightly different. Send me an email with any questions - addmenow (at) mail (dot) com
Joe
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
Returning to Kentucky in the first or second week of February, unless plans change.
Joe
Joe
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
One kit is spoken for in New Mexico. Three still traveling with me.
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
I am in Sun City, AZ. at the moment. I will leave for the Los Angeles area tomorrow, where I will remain for several days. I have things to do and people to see. I have three rail lift kits with me now.
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 3 Star Elite Contributing Member
- Posts: 284
- Joined: Mon Oct 14, 2019 1:47 pm
Re: Headed to CommieFornia soon
Where is CommieFornia?
-
- 3 Star Member
- Posts: 290
- Joined: Sat Oct 27, 2018 2:07 pm
Re: Headed to CommieFornia soon
Right next door to naughtyvada and south of Notagaindia.
Last edited by N2 Welding on Wed Feb 01, 2023 11:57 am, edited 1 time in total.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
Redondo beach and San Diego
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 3 Star Elite Contributing Member
- Posts: 284
- Joined: Mon Oct 14, 2019 1:47 pm
Re: Headed to CommieFornia soon
I am from Canada so not to familiar with all the state names. I learned them all in school tho and even had to write them all out by memory in a test. As I recall it was spelled California. I guess the new woke learning atmosphere does not require folks to learn how to spell
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
I know how to spell. And COMMIEfornia is exactly correct!
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1176
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Headed to CommieFornia soon
You are correct. People trying to be covertly and fully unnecessarily political on plasma cutting forums like to play childish games with spelling of various things.cutnweld wrote: ↑Fri Feb 03, 2023 12:31 pm I am from Canada so not to familiar with all the state names. I learned them all in school tho and even had to write them all out by memory in a test. As I recall it was spelled California. I guess the new woke learning atmosphere does not require folks to learn how to spell
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
Nice try, but FAIL!
I am not politicizing anything. Anyone with a BRAIN knows that COMMIEfornia is the correct spelling for that stinking cesspool of Communism. The term is not applicable to any individual merely because he or she is a subject who lives there, either by choice or by circumstance. To imply that COMMIEfornia is no different than other States is ludicrous.
Joe
I am not politicizing anything. Anyone with a BRAIN knows that COMMIEfornia is the correct spelling for that stinking cesspool of Communism. The term is not applicable to any individual merely because he or she is a subject who lives there, either by choice or by circumstance. To imply that COMMIEfornia is no different than other States is ludicrous.
Joe
Last edited by Joe Jones on Sat Feb 04, 2023 7:44 pm, edited 1 time in total.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 3 Star Member
- Posts: 290
- Joined: Sat Oct 27, 2018 2:07 pm
Re: Headed to CommieFornia soon
Joe, you are simply a little ray to of sunshine on a stormy day. Keep up the good work, we all can use a little more joy and some posative words of encouragement to help us get through our miserable existence.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
Hugs, everyone! HUGS!!!
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 4.5 Star Elite Contributing Member
- Posts: 1820
- Joined: Mon Jun 12, 2017 6:43 pm
Re: Headed to CommieFornia soon
what do you see as communist in California?
or are you confusing communism with socialism?
or are you confusing communism with socialism?
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
Political discussions can be had via PMs.
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- FabLab
- 2 Star Member
- Posts: 65
- Joined: Thu Mar 22, 2018 7:46 pm
Re: Headed to CommieFornia soon
robertspark wrote: ↑Sat Feb 04, 2023 2:27 pm what do you see as communist in California?
or are you confusing communism with socialism?
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
Back in Arizona now for a few days before heading to Albuquerque. Then Dallas, Little Rock and the home again.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
I just installed a lift kit onto a 4 x 4 table in Albuquerque new Mexico today. Tomorrow I am going to leave the area and head for Dallas Texas. After that I am going to Conroy Arkansas. Then I am returning to my home in Franklin Kentucky. I have two of the four lift kits I brought with me still available. These kits give your table 6 inches of Z travel which you can either use manually, or take full advantage of them by adding the customizable size upgrade to your design edge software which is sold by Plasmacam. Buying the kit from me now means I can swing by your house or shop and help you install the kit while I am there. It will also save you the shipping costs. If you’re interested in one of the two remaining kits and you are anywhere along my route home, contact me to see if I can swing by your place on the way. 2707764042 - Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1176
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Headed to CommieFornia soon
I'm betting Conway, Arkansas? That's a few hours from me so the name sounded familiar but I'd not heard of it and Google hasn't either.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
Yep. Conway AR. Here for one more night, tonight, before heading home.
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
The rail lift kit installed onto a DHC2 4x4 table. It works great with the Snap-n-Cut too!
Joe
Joe
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 5 Star Elite Contributing Member
- Posts: 2621
- Joined: Thu Jul 24, 2008 11:15 am
Re: Headed to CommieFornia soon
Looks great and even color matched! Nice work Joe.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3137
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Headed to CommieFornia soon
The $998.00 (CSB) Customizable Size Upgrade is NOT required to use the rail lift kit. However, it is best to add this upgrade to take full advantage of the additional Z height.
Joe
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!