It is currently Wed Nov 21, 2018 3:19 pm

Easyscriber engrave attachment for Hypertherm torch's
 

EASYSCRIBER QUESTIONS

Questions, information, project pics and more relating to plate markers, engravers, and scribes.
weldguy
Posts: 148
Joined: Fri Apr 17, 2009 11:48 am

Re: EASYSCRIBER QUESTIONS

Postby weldguy » Tue Jun 26, 2018 9:27 am

mayper wrote:Hi Everybody,
I have a machine torch on my powermax 45, my question is how do I tell if its a Duramax torch.
Peter


Hey Peter, I am not sure how to tell, it may still be considered a Duramax torch I don't know. I was told that if your torch uses the consumable parts listed below this will work with your torch.

DuramaxConsumables.PNG

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


RobertJohnson
Posts: 485
Joined: Fri Feb 10, 2012 5:13 pm
Location: Cheyenne, WY

Re: EASYSCRIBER QUESTIONS

Postby RobertJohnson » Tue Jul 03, 2018 4:19 am

Will the easyscriber work with a Powermax 900, Pac hand torch? I know, old school, but it works, plus I got a good deal on it.
Thanks for any information you can provide.
Robert Johnson

weldguy
Posts: 148
Joined: Fri Apr 17, 2009 11:48 am

Re: EASYSCRIBER QUESTIONS

Postby weldguy » Tue Jul 03, 2018 10:08 am

RobertJohnson wrote:Will the easyscriber work with a Powermax 900, Pac hand torch? I know, old school, but it works, plus I got a good deal on it.
Thanks for any information you can provide.
Robert Johnson


From what I know it is only available for newer Hypertherm models.

zoeconner
Elite Contributing Member
Elite Contributing Member
Posts: 85
Joined: Sun Aug 21, 2011 12:41 pm

Re: EASYSCRIBER QUESTIONS

Postby zoeconner » Thu Jul 05, 2018 10:42 am

I have a HP with a T80 torch. Will it work?

RobertJohnson
Posts: 485
Joined: Fri Feb 10, 2012 5:13 pm
Location: Cheyenne, WY

Re: EASYSCRIBER QUESTIONS

Postby RobertJohnson » Wed Jul 11, 2018 4:40 am

Thanks, just wondered, was hoping it would work with the pac 123, hand torch. Think that's what I have

User avatar
Sampson Jones
Elite Contributing Member
Elite Contributing Member
Posts: 306
Joined: Mon Jul 25, 2011 9:30 pm

Re: EASYSCRIBER QUESTIONS

Postby Sampson Jones » Wed Jul 25, 2018 5:13 pm

Anybody want to tell me how to set this up in sheetcam ?
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 45
Mach 3
Sheetcam
Corel Draw x 5

weldguy
Posts: 148
Joined: Fri Apr 17, 2009 11:48 am

Re: EASYSCRIBER

Postby weldguy » Wed Jul 25, 2018 11:45 pm

motoguy wrote:When I want to draw with my ink pen, etc I just use the "Mach3" post, which is a router post.


I am not a Sheetcam user but above is what motoguy suggested near the beginning of this thread.

User avatar
Sampson Jones
Elite Contributing Member
Elite Contributing Member
Posts: 306
Joined: Mon Jul 25, 2011 9:30 pm

Re: EASYSCRIBER QUESTIONS

Postby Sampson Jones » Thu Jul 26, 2018 5:47 pm

Here my torch Hypertherm t45m iec60974-7 Im assuming the easy scribe will not work with this powermax torch ? Is that correct ?

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 45
Mach 3
Sheetcam
Corel Draw x 5

plasmanewbie
Elite Contributing Member
Elite Contributing Member
Posts: 425
Joined: Thu Jul 24, 2008 11:15 am

Re: EASYSCRIBER QUESTIONS

Postby plasmanewbie » Thu Jul 26, 2018 9:25 pm

Sampson Jones wrote:Here my torch Hypertherm t45m iec60974-7 Im assuming the easy scribe will not work with this powermax torch ? Is that correct ?


No it won't, I looked into this myself before before buying mine. Look at weldguy's post at the top of this page and your torch must use those consumables for this to fit. Those consumables are found on the 65, 85, 105, and 45xp.

User avatar
Sampson Jones
Elite Contributing Member
Elite Contributing Member
Posts: 306
Joined: Mon Jul 25, 2011 9:30 pm

Re: EASYSCRIBER QUESTIONS

Postby Sampson Jones » Fri Jul 27, 2018 8:36 am

Thanks
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 45
Mach 3
Sheetcam
Corel Draw x 5

zoeconner
Elite Contributing Member
Elite Contributing Member
Posts: 85
Joined: Sun Aug 21, 2011 12:41 pm

Re: EASYSCRIBER QUESTIONS

Postby zoeconner » Thu Sep 27, 2018 7:09 pm

With a little mod it works with T80 hand tourch


Return to “Plate Markers/Air Scribes”

Who is online

Users browsing this forum: No registered users and 3 guests

Easyscriber engrave attachment for Hypertherm torch's