Hello, This is 1st time on this site,
http://roussakis.com.gr/product/jackle- ... tals-120s/
which costs about 4750USD, my question is how good is Jackle 120s plasma cutter compared with hyperterm powermax85 with respect to cut quality, consumable life and consumable price , and Electronic interference.
Hyperterm powermax 85 vs Jackel plasma 120s
-
- 1/2 Star Member
- Posts: 3
- Joined: Thu May 10, 2018 5:18 am
Hyperterm powermax 85 vs Jackel plasma 120s
Last edited by xelalem on Sat Sep 28, 2019 5:46 am, edited 1 time in total.
-
- 4 Star Member
- Posts: 780
- Joined: Sun Aug 21, 2016 1:49 am
- Location: Brisbane, Australia
- Contact:
Re: Hyperterm powermax 85 vs Jackel plasma 120s
The company you linked to lists the Hypertherm 85 on their web site. I'd be concerned about the HF start on the Jackle for CNC use.
-
- 1/2 Star Member
- Posts: 3
- Joined: Thu May 10, 2018 5:18 am
Re: Hyperterm powermax 85 vs Jackel plasma 120s
Dear rodw, the link was to show the product,if i decide i can buy it today but power max will take me at least 3 months.
Last edited by xelalem on Sat Sep 28, 2019 5:47 am, edited 1 time in total.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7848
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Hyperterm powermax 85 vs Jackel plasma 120s
Welcome aboard
The way it looks is you could buy the Jackel and may have problems with the HV start which is discussed on many posts here.
I would try and find a local in your country that has used the Jackel product with a CNC Plasma table to see if they have problems.
Since this is a Greek seller there is very little chance of a US member being able to give you info on reliability, there may be members outside the US that could help.
Or buy the Hypertherm 85 and not have problems, you already state the PM 45 works great sometimes time spent is a good investment.
The way it looks is you could buy the Jackel and may have problems with the HV start which is discussed on many posts here.
I would try and find a local in your country that has used the Jackel product with a CNC Plasma table to see if they have problems.
Since this is a Greek seller there is very little chance of a US member being able to give you info on reliability, there may be members outside the US that could help.
Or buy the Hypertherm 85 and not have problems, you already state the PM 45 works great sometimes time spent is a good investment.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT