Is it possible to convert a 4X4 growth series to a 4x10. I would like to take my gantry from my 4x4 and retro fit it with gear drive and build a 10' long table for it.
I figured this is the place to start.
Should I go with a better driver system. I also have AVHC.
I'm not really happy with the Accumove I have, its very un reliable.
Thanks In advance
Convert a 4X4 Growth series to a 4X8
-
- 1 Star Member
- Posts: 24
- Joined: Sat May 20, 2017 11:30 am
- Location: Fernandina Florida
- Contact:
-
- 1 Star Member
- Posts: 10
- Joined: Wed Nov 02, 2016 9:45 pm
Re: Convert a 4X4 Growth series to a 4X8
I am also wondering the same thing. I have been looking at the classic tm3 and how they have their motors mounted. Did you get anything figured out on yours?
-
- 4 Star Elite Contributing Member
- Posts: 1389
- Joined: Tue Feb 28, 2012 6:47 pm
Re: Convert a 4X4 Growth series to a 4X8
Can't help much with the mechanics but for the controls (including the THC) here is a possible solution: https://www.candcnc.com/store-home/tm-rescue-kit/