Axle Trusses
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Oct 25, 2015 7:59 pm
Axle Trusses
anyone cut any axle trusses or rear end bolt cover rings
I am working on a file right now let me know what yall think when I post
I am working on a file right now let me know what yall think when I post
ABLE CUTTING & FABRICATION
torchmate 4800
BATON ROUGE, LA
torchmate 4800
BATON ROUGE, LA
-
- 2 Star Member
- Posts: 66
- Joined: Sat Dec 26, 2015 12:14 pm
Re: axle trusses
I've got some 14 bolt stuff...also have some of the more common rearend cover patterns
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Oct 25, 2015 7:59 pm
Re: axle trusses
I just got done cutting a truss for a dana 60 not sure if I like it I will post
let me know what you guys think
I am thinking I want it more tight fit to the axle housing
let me know what you guys think
I am thinking I want it more tight fit to the axle housing
ABLE CUTTING & FABRICATION
torchmate 4800
BATON ROUGE, LA
torchmate 4800
BATON ROUGE, LA
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Oct 25, 2015 7:59 pm
Re: axle trusses
dana 60 cover bolt pattern
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
ABLE CUTTING & FABRICATION
torchmate 4800
BATON ROUGE, LA
torchmate 4800
BATON ROUGE, LA
-
- 2.5 Star Elite Contributing Member
- Posts: 183
- Joined: Mon Jun 06, 2011 11:14 am
- Location: Kelso
Re: axle trusses
Toyota truss
ford dana 60 truss
thanks Kevin H
ford dana 60 truss
thanks Kevin H
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
5x10 Flow Waterjet
-
- 2.5 Star Member
- Posts: 150
- Joined: Mon Mar 18, 2013 4:40 am
Re: axle trusses
14 bolt truss
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 34
- Joined: Mon May 16, 2016 12:33 pm
Re: axle trusses
Does anyone have a pattern for a Chevy D 44 front truss
-
- 1/2 Star Member
- Posts: 4
- Joined: Mon Jun 27, 2016 4:32 pm
Re: axle trusses
Does anyone have a Dana30 truss? Looking for one for a Jeep! Thanks
-
- 1/2 Star Member
- Posts: 2
- Joined: Sat Oct 21, 2017 12:42 am
Re: axle trusses
I am looking for the same file. If I find it I will let you know.
-
- 1/2 Star Member
- Posts: 2
- Joined: Tue Dec 29, 2015 12:47 pm
Re: axle trusses
Thanks for the files!!!!
-
- 1 Star Member
- Posts: 14
- Joined: Mon Oct 23, 2017 6:27 pm
Re: axle trusses
Messer MetalMaster Evolution
5-Axis Bevel-R Rotator
10'x25'
5-Axis Bevel-R Rotator
10'x25'
- Boneyard Welding & Fab
- 1.5 Star Member
- Posts: 40
- Joined: Mon Dec 18, 2017 7:45 pm
- Location: Guysville, Ohio
- Contact:
Re: axle trusses
Dana 30 truss
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Boneyard Welding and Fabrication
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225
- Boneyard Welding & Fab
- 1.5 Star Member
- Posts: 40
- Joined: Mon Dec 18, 2017 7:45 pm
- Location: Guysville, Ohio
- Contact:
Re: axle trusses
No idea why that double posted. Thats a file I found on here by another, I take no credit for it.
Boneyard Welding and Fabrication
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225
-
- 3 Star Member
- Posts: 265
- Joined: Sat Aug 29, 2015 9:32 pm
- Location: North Central Pennsylvania
Re: axle trusses
On every Jeep forum I am on, this would be the point where everyone asked why anyone would waste the steel on making a truss for a Dana 30 (Turdy)... LOL
Steve
Homebrewed plasma table in the works, NSK linear rails, 3.2:1 belt reduction, CandCNC Plazpak 1A with DTHCIV Ethercut, Hypertherm 85, CommandCNC and SheetCAM
Click here for build post
Homebrewed plasma table in the works, NSK linear rails, 3.2:1 belt reduction, CandCNC Plazpak 1A with DTHCIV Ethercut, Hypertherm 85, CommandCNC and SheetCAM
Click here for build post
-
- 1 Star Member
- Posts: 17
- Joined: Fri Feb 27, 2015 4:34 pm
Re: axle trusses
Thanks for the file.
- Boneyard Welding & Fab
- 1.5 Star Member
- Posts: 40
- Joined: Mon Dec 18, 2017 7:45 pm
- Location: Guysville, Ohio
- Contact:
Re: axle trusses
Lots of jeeps I go wheeling with are still running the Dana 30 axle, Is it a great option? No. But some guys don't always have the extra cash to swap axles, so upgrading the stock 30 is a low buck option.
I swapped my TJ to dana 44's front and back, so I don't worry about having a dana 30. But I will make and sell things for them because they're still a lot of them out there.
I swapped my TJ to dana 44's front and back, so I don't worry about having a dana 30. But I will make and sell things for them because they're still a lot of them out there.
Boneyard Welding and Fabrication
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225
-
- 1.5 Star Member
- Posts: 29
- Joined: Fri Aug 07, 2015 6:09 pm
Re: axle trusses
would you guys happen to have a truss file for 8.8?
- Boneyard Welding & Fab
- 1.5 Star Member
- Posts: 40
- Joined: Mon Dec 18, 2017 7:45 pm
- Location: Guysville, Ohio
- Contact:
Re: axle trusses
No, I currently do not have a file for the 8.8 axle. Although this could be something I find myself working on in the near future,
Boneyard Welding and Fabrication
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225
-
- 1/2 Star Member
- Posts: 1
- Joined: Sun Mar 03, 2019 10:07 am
Re: axle trusses
hey guys in still looking for a front dana 44 truss file, if anyone can help me I would greatly appreciate it.
-
- 1 Star Member
- Posts: 21
- Joined: Mon Mar 04, 2019 8:24 pm
Re: axle trusses
thanks for the share
-
- 1/2 Star Member
- Posts: 9
- Joined: Fri Feb 22, 2019 7:00 pm
Re: axle trusses
Anyone got a superduty 60 truss? thanks for the share
-
- 1/2 Star Member
- Posts: 3
- Joined: Tue Oct 02, 2018 11:53 am
Re: axle trusses
Anyone have a file for D60 front diff cover?
-
- 3 Star Elite Contributing Member
- Posts: 255
- Joined: Tue Apr 16, 2013 8:47 pm
Re: axle trusses
Yeah Id like a 44 front drivers side drop truss. Ill end up making one.
- _jay_
- 1.5 Star Member
- Posts: 37
- Joined: Fri Feb 14, 2020 4:26 am
Re: axle trusses
Tnx for the dana 30 struss.... can it be used for a 44 ?
The learning curve is exponential AKA "never ends " !
- Boneyard Welding & Fab
- 1.5 Star Member
- Posts: 40
- Joined: Mon Dec 18, 2017 7:45 pm
- Location: Guysville, Ohio
- Contact:
Re: axle trusses
The Dana 30 truss could possibly be used on a Dana 44 with modification. It won't be just a simple weld on fix, but I don't see why I couldn't be made to work with some effort.
Boneyard Welding and Fabrication
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225
Guysville, Ohio
Plasmacam DHC2 4x4
Hypertherm 85
Everlast Power MTS 221STi
Hobart Champion Elite 11000
Hobart Handler 140
Hobart AirForce 250ci
Lincoln AC225