Garden Stakes
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Garden Stakes
I downloaded some garden stakes from here a while ago but put them in an oval instead of square so you just take a piece of 3/16 round about 12 inches long works well
tried 3 times to load the dxf maybe someone could help with that.
tried 3 times to load the dxf maybe someone could help with that.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Greg From Storiesnsteel
-
- 3 Star Member
- Posts: 450
- Joined: Sun Sep 08, 2013 2:17 pm
- Location: Manitoba
Re: garden stakes
Here is your file in dxf. The font may be a little too skinny for most plasma but that is easily changeable.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: garden stakes
thanks for doing that and I agree when you first see it the font looks funny but it is meant to burn out I have burnt all of these files and they burn well happy gardening and have a great day.
Greg From Storiesnsteel
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: garden stakes
Im not sure about others on here but I do get tired of posting files and the vultures swoop in and grab the files without so much as a thanks. Its not about an ego thing its about a wee bit of appreciation for a shared file. I don't post near the files that I used to on here just because of that. I see some awesome files that members obviously spent a lot of time on and are good enough to share and never a thanks. Sad really
Greg From Storiesnsteel
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: garden stakes
You are correct!! 37 down loads and not a thank you one for your time!!!!!!!!! I will be the second after Jason!! Thanks for the share of your time and the file to ya both!!
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: garden stakes
I've noticed the same thing and think it's extremely rude.
Thanks for taking the time to share with us!!!!!!!!!!!!
Thanks for taking the time to share with us!!!!!!!!!!!!
-
- 2.5 Star Member
- Posts: 109
- Joined: Thu Jan 29, 2015 12:52 pm
Re: garden stakes
Thanks for the share GCW8.
The wife and I have made a few of these also. You nailed the idea we were going for. Love the font. Its actually the charactor we were looking for.
The wife and I have made a few of these also. You nailed the idea we were going for. Love the font. Its actually the charactor we were looking for.
Last edited by Brew Worx on Sun Apr 03, 2016 8:34 am, edited 1 time in total.
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
- exapprentice
- 3 Star Member
- Posts: 357
- Joined: Mon Jul 06, 2015 1:57 pm
- Location: Wiltshire, UK
Re: garden stakes
Sad thing is people dont even try the search function for themselves
not hard to do : http://www.plasmaspider.com/viewtopic.php?f=6&t=6352
looks like this project started some 4 years ago from this post in 2012
not hard to do : http://www.plasmaspider.com/viewtopic.php?f=6&t=6352
looks like this project started some 4 years ago from this post in 2012
Best Regards to all
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: garden stakes
I'm convinced that there are at least 20 "bots" that people have running that just download anything with a .dxf and then they sort through them once a week for the ones they want to cut and sell without one smidgen of appreciation. It's the old 80/20 rule for people in any group/clan/club; proven time and time again. Those are the same Oblivians and Sheeple that will screw up any of the generosity and good in people.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
- someguy
- 2 Star Member
- Posts: 84
- Joined: Mon Jul 30, 2012 5:38 pm
- Location: San Antonio, TX
Re: garden stakes
nice design, thanks for the post.
Great gift for my green thumb neighbor.
Great gift for my green thumb neighbor.
-
- 2.5 Star Elite Contributing Member
- Posts: 183
- Joined: Mon Jun 06, 2011 11:14 am
- Location: Kelso
-
- 2 Star Member
- Posts: 67
- Joined: Sat Jul 18, 2015 2:56 pm
- Location: Huntsville, AL
- Contact:
Re: garden stakes
Thanks for sharing. I'll be cutting some of these out for my mother's garden.
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: garden stakes
I did download the garden stakes from here a while ago but pulled out the file and put my own touch to it and reposted them as revised by me. I have posted lots of things on the forum that people have altered and reposted. I look forward to seeing parts of my work show up from time to time incorporated into something even better and that is what I feel thus forum is at least in part is all about. Thanks to all that responded to my post and it is encouraging to see that others have the same thoughts. Thanks so much and have a great weekend folks.
Greg From Storiesnsteel
-
- 3 Star Member
- Posts: 376
- Joined: Thu May 28, 2015 8:02 am
- Location: Merritt island fl.
Re: garden stakes
thanks i had some font that looked like that once an i mess up an deleted it so how trying to put them all in one folder ...opps well thanks nice job
-
- 3 Star Elite Contributing Member
- Posts: 288
- Joined: Wed Aug 27, 2014 12:03 pm
- Location: Shiner
Re: garden stakes
thanks for the file I will shoot some picture with the signs with my wife above ground garden. Robert
Samson 5x10
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: garden stakes
one more correction I made the slots a smidge big so 1/4 round rod will work the best for the stakes
Greg From Storiesnsteel
-
- 2.5 Star Member
- Posts: 109
- Joined: Thu Jan 29, 2015 12:52 pm
Re: garden stakes
We have been finding that customers contact us asking for simiar idea based off a google search. Then of course they ask for it to be customized. At the same or lower price if course.
Great up load nf thanks for sharing.
Great up load nf thanks for sharing.
Brew Worx.
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
Blue Frog Metal Works
Chicagoland
Arclight 4800
Hypertherm 45
4 inch tube cutter
Mach 3, SheetCAM, Solid Edge 2D, Solid Works 3D, CREO, Inkscape, and a few cobb webs
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: garden stakes
I get a lot of the same thing they will pick one of my files then want their name or something custom for the same price. I always say art work starts at 30 dollars and goes from there.
Greg From Storiesnsteel
- TimP
- 2 Star Elite Contributing Member
- Posts: 82
- Joined: Sat Jan 31, 2015 2:42 pm
- Location: Tyler, TX, USA
Re: garden stakes
Thank you very much for taking the time to make and share these!
TIm
TIm
- Kenny Burleson
- 1.5 Star Member
- Posts: 32
- Joined: Sat Jun 29, 2013 3:19 pm
- Location: Hamilton,Texas
- Contact:
Re: garden stakes
Thank you ,my wife will love these for her garden. I appreciate everyone that shares on here. I am still learning to draw and I do not have a problem paying Plasmas Spiders annual fee until I can do my own drawings.i will be glad when i can share my own on here!
-
- 2.5 Star Elite Contributing Member
- Posts: 196
- Joined: Tue Oct 15, 2013 8:39 pm
Re: garden stakes
thank you !!
-
- 1/2 Star Member
- Posts: 7
- Joined: Thu Mar 06, 2014 2:32 pm
Re: garden stakes
Those are great, thanks!
- edclayton1
- 2.5 Star Member
- Posts: 123
- Joined: Thu Sep 25, 2014 10:57 pm
- Location: Rathdrum, Idaho
Re: garden stakes
Thanks man. Very cool.
Home Built 4 * 8 table
Bladerunner
Miller Syncrowave 250 TIG welder
Miller 211 Wirefeed Welder
Bridgeport Mill
Jet 13 * 40 Lathe
Hypertherm Powermax 65
80 gal 2 stage 175 PSI Emax air Compressor
Bladerunner
Miller Syncrowave 250 TIG welder
Miller 211 Wirefeed Welder
Bridgeport Mill
Jet 13 * 40 Lathe
Hypertherm Powermax 65
80 gal 2 stage 175 PSI Emax air Compressor