hello hello

welding shed · Post by **welding shed** » Thu Aug 10, 2023 1:19 pm

Hello all.
I'm from england uk ..and have been a welder for around 25 to 30 years and after having to cut out the last two projects 3mm sheet with an angle grinder i decided a plasma build was long over due i have around 80 percent of build in parts and was trawling the web when i came across the forum.
Thanks for having us.

Post by **plasmanewbie** » Mon Aug 14, 2023 11:43 am

Welcome! Many here including myself would be interested to see your build if you have the chance to posts pics. Sure would be nice to retire the angle grinder for intricate cutting operations!

welding shed · Post by **welding shed** » Mon Aug 14, 2023 1:47 pm

Thanks plasma,Will do.

Post by **TJS** » Mon Aug 14, 2023 1:59 pm

Welcome. I use my table in almost every welding project I do.

Post by **Joe Jones** » Mon Aug 14, 2023 8:40 pm

welding shed wrote: ↑Thu Aug 10, 2023 1:19 pm Hello all.
I'm from england uk .
Thanks for having us.

Welcome to the madness! I also would like to see how you set up your table, and the type of things you make with it.

Joe

Post by **adbuch** » Tue Aug 15, 2023 2:36 am

Welcome aboard! I will look forward to following your diy table build.
David

welding shed · Post by **welding shed** » Tue Aug 15, 2023 4:49 am

Joe Jones wrote: ↑Mon Aug 14, 2023 8:40 pm I also would like to see how you set up your table, and the type of things you make with it.

Joe

Thanks all,It will be a 4x2 ft-ish, It will help me build a bigger table at a later date when i upgrade the shed..
After my last project (link below) and the one before that i decided I am doing no more cutting with a grinder.

The forum has already got me questioning the electronics i allready have...cheap mach3 board,mach 3 etc..im now looking at the proma myplasm set up.
i will start a thread soon.thanks

Post by **adbuch** » Tue Aug 15, 2023 7:35 am

Welding Shed - thanks for the video! That's a really nice looking wood stove you built. Back in the day I had a wood burning stove made from an old oil drum. It was right here in my office, which in those days was my entire workshop of 300 square feet. Keep us posted on your diy build. I actually did a small diy build a few years ago. It was intended to be a cnc router with cnc plasma cutting capability. I was using an Arduino/grbl combo and it actually worked pretty well. You can read more about it here.

https://desert-hybrids.com/id57.html

: rmax.jpg (85.44 KiB) Viewed 697 times

It was intended as a small machine for the home hobbyist.

Good luck with your own diy project.

David

welding shed · Post by **welding shed** » Tue Aug 15, 2023 10:45 am

Thanks david i will take a look.

hello hello

hello hello

Re: hello hello

Re: hello hello

Re: hello hello

Re: hello hello

Re: hello hello

Re: hello hello

Re: hello hello

Re: hello hello