Hi,
I am in Australia and looking at buying a table hoping to do a bit of work from home, I am thinking most of my work would be with lighter material maybe the occasional 3/8th so I was planning on a Hypertherm 45 (single phase power only)
I would really appreciate your advice on a few of the tables I have narrowed it down to
TIA
John
Table decision
-
- 1/2 Star Member
- Posts: 5
- Joined: Mon Jan 08, 2018 4:21 pm
Table decision
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1/2 Star Member
- Posts: 5
- Joined: Mon Jan 08, 2018 4:21 pm
Re: Table decision
This is another one I looked at, Chinese I am pretty sure
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Elite Contributing Member
- Posts: 270
- Joined: Sat Dec 20, 2014 3:12 am
- Location: Barossa Valley, South Australia
Re: Table decision
John
I am in Australia as well and have the Powermax 45 myself.
I have had my power updated with 10mm cable from my main power box from the house to my shed and use 2 15 amp power plugs at the same time (1 for plasma and the other for air compressor). I have had no issues with also cutting 12mm (on odd occasions) as well.
My power was only 4mm cable which would not hold up so I went with the extra than 6mm than first planned.
Even though I have dealt with Machinery House with other machinery I went to the USA to get my table as I had a smaller budget.
Hope this helps.
Mtw fdu.
I am in Australia as well and have the Powermax 45 myself.
I have had my power updated with 10mm cable from my main power box from the house to my shed and use 2 15 amp power plugs at the same time (1 for plasma and the other for air compressor). I have had no issues with also cutting 12mm (on odd occasions) as well.
My power was only 4mm cable which would not hold up so I went with the extra than 6mm than first planned.
Even though I have dealt with Machinery House with other machinery I went to the USA to get my table as I had a smaller budget.
Hope this helps.
Mtw fdu.
Camcutcnc 4 x 4 plasma cutter with UC 100 Motion Controller
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis
Laser cross hairs
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis
Laser cross hairs
-
- 1/2 Star Member
- Posts: 5
- Joined: Mon Jan 08, 2018 4:21 pm
Re: Table decision
Thanks mate I ended up buying a plasmacam DHC 2 with a Hypertherm 45, now I hope I don’t have to update my power to the shed
-
- 3 Star Elite Contributing Member
- Posts: 270
- Joined: Sat Dec 20, 2014 3:12 am
- Location: Barossa Valley, South Australia
Re: Table decision
Keep us posted when it arrives and you are making sparks.
Mtw fdu.
Mtw fdu.
Camcutcnc 4 x 4 plasma cutter with UC 100 Motion Controller
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis
Laser cross hairs
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis
Laser cross hairs