Need trace help please
-
- 1 Star Member
- Posts: 17
- Joined: Mon Nov 13, 2017 1:09 am
- Location: Schererville IN
- Contact:
Need trace help please
Hi, my buddy’s youth wrestling club is looking for me to make them a couple medallions that they wear around their necks when they win. Could somebody help me with a trace on this? Don’t need the blue letters, just the outside and inside done. Thanks in advance
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Arclight pro X 12000
Wood router / Engraver
Photo tracer
Hypertherm 85
Emax silent air 7.5HP Compressor
Inkscape / Qcad / Sheetcam / Open to any other software to pick up.
Wood router / Engraver
Photo tracer
Hypertherm 85
Emax silent air 7.5HP Compressor
Inkscape / Qcad / Sheetcam / Open to any other software to pick up.
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1952
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Need trace help please
The yellow part is all straight lines. Just bring the photo into your cad program and draw some lines. Should be simple if you have any cad experience at all. If not, it would be a good first project to learn on.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 1 Star Member
- Posts: 17
- Joined: Mon Nov 13, 2017 1:09 am
- Location: Schererville IN
- Contact:
Re: Need trace help please
I do have Qcad. I can draw a box so I was trying my best LOL. Thanks
Arclight pro X 12000
Wood router / Engraver
Photo tracer
Hypertherm 85
Emax silent air 7.5HP Compressor
Inkscape / Qcad / Sheetcam / Open to any other software to pick up.
Wood router / Engraver
Photo tracer
Hypertherm 85
Emax silent air 7.5HP Compressor
Inkscape / Qcad / Sheetcam / Open to any other software to pick up.
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1952
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Need trace help please
YouTube is a good place to learn how to draw things. If you can import the picture into qcad then you should be able to use a line tool and outline the picture.
I'm no cad whiz, and a couple of years ago I couldn't have even drawn a box, but the more you work with it the easier it gets.
I'm no cad whiz, and a couple of years ago I couldn't have even drawn a box, but the more you work with it the easier it gets.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1180
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Need trace help please
Here you go - look up my youtube of using paint.net to get something that will auto trace. I just manually traced this in about 10 minutes. Made you a 4" round medallion with the logo, a 3.5" wide of just the logo. Also threw in cut paths (using a .045 kerf estimate) and left the original trace as well.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
-
- 1 Star Member
- Posts: 17
- Joined: Mon Nov 13, 2017 1:09 am
- Location: Schererville IN
- Contact:
Re: Need trace help please
Awesome thank you very much!!! I will definitely practice on tracing and drawing!! Again thank you
Arclight pro X 12000
Wood router / Engraver
Photo tracer
Hypertherm 85
Emax silent air 7.5HP Compressor
Inkscape / Qcad / Sheetcam / Open to any other software to pick up.
Wood router / Engraver
Photo tracer
Hypertherm 85
Emax silent air 7.5HP Compressor
Inkscape / Qcad / Sheetcam / Open to any other software to pick up.
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1952
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Need trace help please
Great job Robert. Over and above. That's what I like about this site.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 1 Star Member
- Posts: 17
- Joined: Mon Nov 13, 2017 1:09 am
- Location: Schererville IN
- Contact:
Re: Need trace help please
Dj you are so right!!! I learned so much!! Made so much progress in 3 months from this site I can’t even explain it! All the help. The Pms from members sending links to videos and answering question. I can’t no way thank everyone enough!!!
Arclight pro X 12000
Wood router / Engraver
Photo tracer
Hypertherm 85
Emax silent air 7.5HP Compressor
Inkscape / Qcad / Sheetcam / Open to any other software to pick up.
Wood router / Engraver
Photo tracer
Hypertherm 85
Emax silent air 7.5HP Compressor
Inkscape / Qcad / Sheetcam / Open to any other software to pick up.
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1180
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Need trace help please
You're certainly welcome! I learn something new every day and hope to continue that until I'm no longer sucking wind! As my daddy always said, those that believe they've arrived are usually the ones with the longest yet to go.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
Did I help and you want to help me out? Buy me a coffee! - Thanks!