Ryan PT-22 Plane
-
- 2 Star Member
- Posts: 51
- Joined: Thu Aug 07, 2014 4:31 pm
Ryan PT-22 Plane
The gentleman who owns the plane in the picture, as well as the pilot has asked me to do a cutout of his plane so he can put it on the gate at his property. I have tried to get it to load up and convert to a DXF on my plasmacam table as well as tried to convert it in inkscape. I am having no luck. I have attached a jpeg of the plane. Can someone on this site convert the plane to a DXF for me? I am willing to pay for it. Thanks.
Boyd Fortin
Boyd Fortin
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Ryan PT-22 Plane
Sorry it flew the coop!
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 2 Star Member
- Posts: 51
- Joined: Thu Aug 07, 2014 4:31 pm
Re: Ryan PT-22 Plane
I think the file I too large. I am working on trying to optimize the picture. I will try to download it if I can get it optimized. Thanks
Boyd Fortin
Boyd Fortin
-
- 2 Star Member
- Posts: 51
- Joined: Thu Aug 07, 2014 4:31 pm
Re: Ryan PT-22 Plane
I will try it again with a new thread later.
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Ryan PT-22 Plane
I'm sure someone will help you when you get it loaded. The PT-22 was a good old trainer.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2643
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Ryan PT-22 Plane
Load your picture into PAINT and use the RESIZE to make the PG smaller.bafortin wrote:I think the file I too large. I am working on trying to optimize the picture. I will try to download it if I can get it optimized. Thanks
Boyd Fortin
Larry
-
- 2 Star Member
- Posts: 51
- Joined: Thu Aug 07, 2014 4:31 pm
Re: Ryan PT-22 Plane
Ok, I was finally able to figure out how to resize the picture so I can add the file in the thread. Below is a picture of the plane that I need help converting to a DXF. As I said above, I am willing to pay someone to convert it to a DXF. Thanks.
Boyd
Boyd
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7848
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Ryan PT-22 Plane
Looks like the one Harrison Ford played golf with
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 3 Star Member
- Posts: 267
- Joined: Wed Nov 07, 2012 11:24 am
- Location: Virginia
Re: Ryan PT-22 Plane
This came together nicely.
Can someone explain how to make the image of the file come up on the screen as well? Thought "place inline" would work but it doesn't seem to. Either way, hope this file is what you were looking for.
Can someone explain how to make the image of the file come up on the screen as well? Thought "place inline" would work but it doesn't seem to. Either way, hope this file is what you were looking for.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
PlasmaCam DHC2
Hypertherm Powermax 65
Millermatic 211 MIG Welder
Hypertherm Powermax 65
Millermatic 211 MIG Welder
- larrycameron44
- 3.5 Star Member
- Posts: 579
- Joined: Sun Oct 31, 2010 4:12 pm
- Location: Auckland New Zealand
Re: Ryan PT-22 Plane
icmplasma85icmplasma85 wrote:This came together nicely.
Can someone explain how to make the image of the file come up on the screen as well? Thought "place inline" would work but it doesn't seem to. Either way, hope this file is what you were looking for.
I just take a screenshot of the dxf when onscreen using the windows inbuilt “snipping” tool.
Cheers
Larry Cameron
RusticMetalArt
-
- 3 Star Member
- Posts: 267
- Joined: Wed Nov 07, 2012 11:24 am
- Location: Virginia
Re: Ryan PT-22 Plane
ohhhhhh
The K.I.S.S method. It makes sense I was trying to make it more complicated than need be .. Thanks Larry
The K.I.S.S method. It makes sense I was trying to make it more complicated than need be .. Thanks Larry
PlasmaCam DHC2
Hypertherm Powermax 65
Millermatic 211 MIG Welder
Hypertherm Powermax 65
Millermatic 211 MIG Welder
-
- 2 Star Member
- Posts: 51
- Joined: Thu Aug 07, 2014 4:31 pm
Re: Ryan PT-22 Plane
icmplasma85, this is awesome. That's for the conversion. Once I cut it Ii will post a picture of it. Thanks again.
Boyd Fortin
Boyd Fortin
-
- 3 Star Member
- Posts: 267
- Joined: Wed Nov 07, 2012 11:24 am
- Location: Virginia
Re: Ryan PT-22 Plane
No problem. And btw, use this file if you haven't already cut this. I bridged a few extra things to make it more solid. Forgot to repost it the other day. The first one should be fine but better safe than sorry. Enjoy.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
PlasmaCam DHC2
Hypertherm Powermax 65
Millermatic 211 MIG Welder
Hypertherm Powermax 65
Millermatic 211 MIG Welder
-
- 2 Star Member
- Posts: 51
- Joined: Thu Aug 07, 2014 4:31 pm
Re: Ryan PT-22 Plane
I have not cut it yet, so I will download this copy. I will probably will cut it next week since he and his wife are wanting some other things as well. I will post a picture after I cut it. Thanks again.
Boyd Fortin
Boyd Fortin
-
- 2 Star Member
- Posts: 51
- Joined: Thu Aug 07, 2014 4:31 pm
Re: Ryan PT-22 Plane
Sorry it took me so long to download a picture of the finished product, but here it is. Since the pilot was putting it on a gate, I had to fill in the wings for stability and strength. I think it turned out excellent, and so did he. I did have to do another one since I forgot to fix the 0. Thanks.
Boyd Fortin
Boyd Fortin
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here