Can anyone help me get this file into DXF format? I am looking to create this as a gift for my boss.
File conversion help needed
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: File conversion help needed
5 for 5 LOL
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 1/2 Star Member
- Posts: 8
- Joined: Sat Jul 30, 2016 5:21 pm
Re: File conversion help needed
Not too sure what you mean by thislittle blue choo wrote:5 for 5 LOL
-
- 1/2 Star Member
- Posts: 8
- Joined: Sat Jul 30, 2016 5:21 pm
Re: File conversion help needed
Disregard my previous post, after a quick search of your post I see you don't like when people ask for help.
Some of us may not make several thousand posts or comment on every topic like you. If you will notice, my "5 for 5" have all been for projects for friends and family members and nothing I profit off of.
As I have been on the board and paid my dues, I do not have all of the software needed for file conversions and thought I would ask for help.
Some of us may not make several thousand posts or comment on every topic like you. If you will notice, my "5 for 5" have all been for projects for friends and family members and nothing I profit off of.
As I have been on the board and paid my dues, I do not have all of the software needed for file conversions and thought I would ask for help.
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2643
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: File conversion help needed
I see that you have Inkscape. Perhaps asking for help using it to convert your projects to DXF would be better for you, then you wouldn't have to rely on others and your turnaround time would be less. Just my 2 cents.
Larry
Larry
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: File conversion help needed
I don't mind people asking for help. We all do that. If you would post what you have come up with on a file so that people know you are really trying you would get a lot of responses. Most people here are willing to help if they can see you are wanting to learn. Sorry I offended you. Post what you have on this file and see just how many of us offer help. You may be surprised.cmalin wrote:Disregard my previous post, after a quick search of your post I see you don't like when people ask for help.
Some of us may not make several thousand posts or comment on every topic like you. If you will notice, my "5 for 5" have all been for projects for friends and family members and nothing I profit off of.
As I have been on the board and paid my dues, I do not have all of the software needed for file conversions and thought I would ask for help.
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 1/2 Star Member
- Posts: 8
- Joined: Sat Jul 30, 2016 5:21 pm
Re: File conversion help needed
Thanks,
I only have access to the software/table on saturdays so I will see what I can get done. I was just trying to get it cut this weekend.
Thanks for the advice
I only have access to the software/table on saturdays so I will see what I can get done. I was just trying to get it cut this weekend.
Thanks for the advice
-
- 1.5 Star Member
- Posts: 34
- Joined: Thu Feb 26, 2015 10:45 am
Re: File conversion help needed
here you go. we all need help sometimes.
check for drop outs (eye + fork)
check for drop outs (eye + fork)
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7848
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: File conversion help needed
If you really want it to pop make is in a 3D layered style cut the green and black parts out and glued them on a disk with the red letter cut out and then have a red disk behind
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: File conversion help needed
That's the way I would do it also Acourtjester. I love making layered signs or as we call them in the shop 3D signs. Made one today will post pictures tomorrow if I get time. Cmalin if you were to layer this sign it would look so much better than trying to cut it as one piece and I'm sure your boss would be impressed.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape