American Force Truck Wheel
-
- 1/2 Star Member
- Posts: 1
- Joined: Tue Dec 20, 2016 7:54 pm
American Force Truck Wheel
i have a Drawing for some custom wheels i need help with i cant seem to get them right thanks.
-
- 2 Star Member
- Posts: 52
- Joined: Wed Sep 09, 2015 6:18 pm
- Location: Tumut NSW Australia
Re: Help needed on drawing
not sure what your after, not sure how much detail hope this helps. I left the writing out didn't know if you wanted it in.
should be ok but check and clean up before cutting
should be ok but check and clean up before cutting
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7848
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Help needed on drawing
Hi Alan
What software did you use to trace that wheel??
What software did you use to trace that wheel??
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2 Star Member
- Posts: 52
- Joined: Wed Sep 09, 2015 6:18 pm
- Location: Tumut NSW Australia
Re: Help needed on drawing
hi
i did the wheel by hand using a mixture of corel draw and solid edge.
wasn't possible to get good trace thro corel so just made circles and drew key components then circular pattern tool.
pretty simple when you break it down as its only geometric shapes.
I tweaked it this morning and sorted some issues, even included the lettering
i did the wheel by hand using a mixture of corel draw and solid edge.
wasn't possible to get good trace thro corel so just made circles and drew key components then circular pattern tool.
pretty simple when you break it down as its only geometric shapes.
I tweaked it this morning and sorted some issues, even included the lettering
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7848
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Help needed on drawing
Thanks for the reply nice work I use Inkscape but images like that you cannot do a quick trace, wanted to see if there was a better way.
I'm to cheap to buy those expensive packages.
I'm to cheap to buy those expensive packages.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2643
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Help needed on drawing
acourtjester wrote:Thanks for the reply nice work I use Inkscape but images like that you cannot do a quick trace, wanted to see if there was a better way.
I'm to cheap to buy those expensive packages.
If you look around you can get many software programs reasonable. I just looked and found " Corel DRAW Home and Student Suite X7 (3-Users)" for less than $40. Not bad if you use less then 3 computers. Other software can be found for a reasonable price if you look around.
Larry
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7848
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Help needed on drawing
I be looking around
whoops not to many students my age well Amazon has home and student for $47. may need to jump on that.
Thanks
whoops not to many students my age well Amazon has home and student for $47. may need to jump on that.
Thanks
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2 Star Member
- Posts: 52
- Joined: Wed Sep 09, 2015 6:18 pm
- Location: Tumut NSW Australia
Re: Help needed on drawing
I bought it because solid edge wasn't doing it for me in the arty area, sure its great for structural parts but anything else Corel draw for me.
I've been self taught with Corel over many hours because I needed answers I couldn't find on the net, like anything the more you use it the more proficient you become with your package and then nothing really phases you. sure I could spend a few more hours tweaking bits and pieces on any drawing that I convert for people, but once people see what can be done then maybe it'll inspire them to have a go at converting images, after all at the end of the day its not that hard once you learn the programme
I've been self taught with Corel over many hours because I needed answers I couldn't find on the net, like anything the more you use it the more proficient you become with your package and then nothing really phases you. sure I could spend a few more hours tweaking bits and pieces on any drawing that I convert for people, but once people see what can be done then maybe it'll inspire them to have a go at converting images, after all at the end of the day its not that hard once you learn the programme
-
- 2.5 Star Member
- Posts: 135
- Joined: Tue Sep 02, 2008 4:33 pm
Re: American Force Truck Wheel
WOW ALAN, killer work on this one!
-
- 2 Star Member
- Posts: 52
- Joined: Wed Sep 09, 2015 6:18 pm
- Location: Tumut NSW Australia
Re: American Force Truck Wheel
Thanksplasmapros wrote:WOW ALAN, killer work on this one!
Alan
-
- 3.5 Star Elite Contributing Member
- Posts: 573
- Joined: Fri Jul 20, 2012 12:08 pm
Re: American Force Truck Wheel
Than I got a question.How does Corel draw home and student X7 compare with Coreldraw x7? education?
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
- runninwild400
- 2.5 Star Elite Contributing Member
- Posts: 148
- Joined: Wed Oct 15, 2008 5:24 pm
- Location: Ontario Canada
Re: American Force Truck Wheel
Make sure it will save as a dxf, I have a home and student version and it will not save as a dxf.
Brian
Metal-Magic
Metal-Magic
-
- 3.5 Star Elite Contributing Member
- Posts: 573
- Joined: Fri Jul 20, 2012 12:08 pm
Re: American Force Truck Wheel
Thanks that's kind of what I thought.
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut