I need to try to do this image into a license plate for a customer. I am going to make it 2 pieces. A top plate and a bottom plate. Each will be powder coated and glued together. Is there anyone that can help me out? I dont really need the tire tread, just the letters and the chick
Thanks
Garrett
Can anyone help me with a trace
-
- 2.5 Star Member
- Posts: 155
- Joined: Tue Dec 18, 2012 9:33 am
- Location: Lexington, KY
- Contact:
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Can anyone help me with a trace
Can't help at the moment with the trace. Just wondering why your glueing/bonding the backing, Just make a backing tag blank, coat it and it will bolt together with the mounting bolts from the front plate.
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 2.5 Star Member
- Posts: 155
- Joined: Tue Dec 18, 2012 9:33 am
- Location: Lexington, KY
- Contact:
Re: Can anyone help me with a trace
I just use a little sika flex to hold them together until the customer can volt it to the vehicle. The two bolts will hold it all permanent,this just keeps the two pieces from sliding around and scratching each other during shipping
-
- 2.5 Star Elite Contributing Member
- Posts: 107
- Joined: Sat Nov 14, 2009 3:45 pm
Re: Is it ok to post this dxf? Is it copyrighted?
Would it be ok for me to post a dxf for this? It might be a copyrighted.
Pat
Pat
-
- 2.5 Star Member
- Posts: 155
- Joined: Tue Dec 18, 2012 9:33 am
- Location: Lexington, KY
- Contact:
Re: Can anyone help me with a trace
I don't believe that the image is copyrighted, the owner gave me permission to use it to make her cut file
-
- 2.5 Star Elite Contributing Member
- Posts: 107
- Joined: Sat Nov 14, 2009 3:45 pm
Re: Can anyone help me with a trace
I hope this helps you.
Pat
Pat
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Elite Contributing Member
- Posts: 107
- Joined: Sat Nov 14, 2009 3:45 pm
Re: Can anyone help me with a trace
OOPS, wait a minute! I just took a closer look at that chicken, and it looks like she's brandishing two pistals. Sorry, my mistake, normally chickens only pack one gun. It's very unusual for a chicken to pack that much heat.
Pat
Pat
-
- 2.5 Star Elite Contributing Member
- Posts: 107
- Joined: Sat Nov 14, 2009 3:45 pm
Re: Can anyone help me with a trace
She should have enough fire power now.
Pat
Pat
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 155
- Joined: Tue Dec 18, 2012 9:33 am
- Location: Lexington, KY
- Contact:
Re: Can anyone help me with a trace
LOL Thanks Patc. I can take that and run with it for now. I need to learn how to do a trace sometime...