Hey guys,
I have a new job coming in I need to make some angled cuts I haven't tackled before. Here is a few details with drawings. Looking to see if anyone as any good advice on set up and operation for this.
Oxy-Fuel Cutting Big Plate at Angle
-
- 1 Star Member
- Posts: 12
- Joined: Thu Aug 15, 2013 10:46 pm
Oxy-Fuel Cutting Big Plate at Angle
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Elite Contributing Member
- Posts: 1996
- Joined: Fri Apr 17, 2009 11:48 am
Re: Oxy-Fuel Cutting Big Plate at Angle
What parts from this pdf are you having to cut?
-
- 1 Star Member
- Posts: 12
- Joined: Thu Aug 15, 2013 10:46 pm
Re: Oxy-Fuel Cutting Big Plate at Angle
The 3 different size plates on the second page.
- SegoMan DeSigns
- 4 Star Member
- Posts: 863
- Joined: Sat Jan 06, 2018 4:45 pm
Re: Oxy-Fuel Cutting Big Plate at Angle
Here is a link to a thread started by Sean P, my version of the torch mount has a miter feature:
viewtopic.php?f=103&t=24499&start=25
Here is a miter on some 3/4" plate
viewtopic.php?f=103&t=24499&start=25
Here is a miter on some 3/4" plate
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here