need springtime oval theme for mom.-Welcome Sign
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
need springtime oval theme for mom.-Welcome Sign
I am willing to pay for a spring oval theme, can be either bird, flowers, butterfly for a bench I am making for my mom. the area is 18" x 30" wide. thanks
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: need springtime oval theme for mom.
Not really an oval but you may be able to work with this, look in the shirt 1 dxf on this post
http://www.plasmaspider.com/viewtopic.php?f=6&t=13371
http://www.plasmaspider.com/viewtopic.php?f=6&t=13371
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: need springtime oval theme for mom.
not good,
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
- 2 Star Member
- Posts: 60
- Joined: Thu Jan 09, 2014 9:33 pm
Re: need springtime oval theme for mom.-Welcome Sign
This is from this site a while back. Not an oval but you may be able to make it work.
No Class
No Class
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Elite Contributing Member
- Posts: 44
- Joined: Tue Oct 27, 2009 8:35 pm
Re: need springtime oval theme for mom.-Welcome Sign
Would this work?
It was too big without being zipped to load.
It was too big without being zipped to load.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Member
- Posts: 450
- Joined: Sun Sep 08, 2013 2:17 pm
- Location: Manitoba
Re: need springtime oval theme for mom.-Welcome Sign
Here is your file with a pile of nodes reduced, much smaller file now.oldfolks1 wrote:Would this work?
It was too big without being zipped to load.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
-
- 1.5 Star Elite Contributing Member
- Posts: 44
- Joined: Tue Oct 27, 2009 8:35 pm
Re: need springtime oval theme for mom.-Welcome Sign
MetalTorcher,
What program do you reduce the node count with? I cannot seem to find a way to do so with the programs I use.
What program do you reduce the node count with? I cannot seem to find a way to do so with the programs I use.
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: need springtime oval theme for mom.-Welcome Sign
Thanks so much for this picture, cutting today! This is such a great web site Jason, it has help a newbie like me. All a person has to do is mostly read and ask questions. Thanks again!
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
- 3 Star Member
- Posts: 450
- Joined: Sun Sep 08, 2013 2:17 pm
- Location: Manitoba
Re: need springtime oval theme for mom.-Welcome Sign
I used Plasmacam's DesignEdge. It has worked so well for me that I haven't really had the need for any other programs. My understanding is that Inkscape can possibly simplify files but I haven't explored that. Maybe someone with more experience with other software such as CorelDraw could chime in here.oldfolks1 wrote:MetalTorcher,
What program do you reduce the node count with? I cannot seem to find a way to do so with the programs I use.
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: need springtime oval theme for mom.-Welcome Sign
Thanks for posting.
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: need springtime oval theme for mom.-Welcome Sign
Looks good!! Corel does a good job reducing nodes as well..
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: need springtime oval theme for mom.-Welcome Sign
it's cut out and off to powder coat. do you like the welcome sign or change it?
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
- 3.5 Star Elite Contributing Member
- Posts: 623
- Joined: Sat Aug 25, 2012 8:08 pm
- Location: Edmonton, Alberta Canada
- Contact:
Re: need springtime oval theme for mom.-Welcome Sign
I think it looks great. Well done.
Gary
Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
-
- 3 Star Member
- Posts: 450
- Joined: Sun Sep 08, 2013 2:17 pm
- Location: Manitoba
Re: need springtime oval theme for mom.-Welcome Sign
My wife thinks the lettering could be prettier or more in tune with the flowers. Whenever I design something she has suggestions for improvements that can only come from feminine eyes. We like the one in your first pic better.Proballz03 wrote:it's cut out and off to powder coat. do you like the welcome sign or change it?
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: need springtime oval theme for mom.-Welcome Sign
Maybe another dfx file on top instead of Giant Welcome sign? any suggestions need file too! thanks
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
- yeomansjon
- 3 Star Member
- Posts: 329
- Joined: Fri Oct 05, 2012 1:28 pm
- Contact:
Re: need springtime oval theme for mom.-Welcome Sign
I agree and looks like it would work for something I am making. Proballz03, do you know what font you used for the 'Welcome' sign in the first picture you posted?MetalTorcher wrote: My wife thinks the lettering could be prettier or more in tune with the flowers. Whenever I design something she has suggestions for improvements that can only come from feminine eyes. We like the one in your first pic better.
Fast Jonny Custom Design
CNC Plasma Cutting
Plasmacam DHC
Hypertherm Powermax 1000
www.facebook.com/fastjonnycustomdesign
CNC Plasma Cutting
Plasmacam DHC
Hypertherm Powermax 1000
www.facebook.com/fastjonnycustomdesign
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: need springtime oval theme for mom.-Welcome Sign
it was a western font but really don't remember exactly.
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
- 2.5 Star Elite Contributing Member
- Posts: 175
- Joined: Thu Jun 27, 2013 6:37 am