Fan Clutch Spanners

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
SSLLC
1 Star Member
1 Star Member
Posts: 15
Joined: Mon Jun 16, 2014 7:10 pm

Fan Clutch Spanners

Post by SSLLC »

Metric and Standard. Need to adjust your kerf offset accordingly.

Image
Fan Clutch Wrenchs STD and MET.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Andrew Spurr Owner of SS LLC Est. 2011

Miller Millermatic 252, Miller Millermatic 212 Autoset, Miller Bobcat 225, Miller Syncrowave 210
Lincoln LN25
JD2 Programmable Bender
Thermodynamics 42
Hypertherm 45, 65 with machine torch
Trucut Series One 4x8
User avatar
Zippo
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1709
Joined: Fri Mar 04, 2011 12:49 pm
Location: Minnesota Based

Re: Fan Clutch Spanners

Post by Zippo »

Thanks for posting.
User avatar
someguy
2 Star Member
2 Star Member
Posts: 84
Joined: Mon Jul 30, 2012 5:38 pm
Location: San Antonio, TX

Re: Fan Clutch Spanners

Post by someguy »

Very handy, thanks for the post.
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Fan Clutch Spanners

Post by little blue choo »

OK, I own a auto repair shop and have been a ASE certified Master Tech for over 40 years. I own and use fan clutch wrenches on a regular basis but don't under stand the hook on the end. Can someone help me here? I know I must be missing something. Not blond but I am getting old. LOL
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
rockstar metalworks
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sat Jun 16, 2012 2:20 am

Re: Fan Clutch Spanners

Post by rockstar metalworks »

It's for using an air hammer to break the fan nut loose and tighten it without having to hold the fan clutch from rotating. Just put the wrench on in the right orientation and put your air hammer in the hook, hit it with a couple of quick bursts from the air hammer and the fan will come loose. Great tools. Built one for a buddy of mine that works for GM and he loves it. You can also add in your initials when cutting just to guarantee it doesn't find a new home!
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Fan Clutch Spanners

Post by little blue choo »

Why did I not know that. I saw this system in one of our trade mag's a year or so ago. Like I said, I'm getting OLD! LOL
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Corfabrication
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Mon Nov 03, 2014 2:04 pm
Location: Racine Wi
Contact:

Re: Fan Clutch Spanners

Post by Corfabrication »

Awesome file. Thanks for the share
teachag
1 Star Member
1 Star Member
Posts: 17
Joined: Sun Nov 03, 2013 11:16 pm
Location: Linden California

Re: Fan Clutch Spanners

Post by teachag »

I just changed the water pump on my 7.3l Ford and had to borrow one from a student. Reverse engineering his was on my list to do but now I will not have to. Thank you very much. I also like the air hammer hook. His did not have that. These things are a life saver.
gwt181
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Mon Feb 02, 2015 9:38 am
Location: Denham Springs, Louisiana

Re: Fan Clutch Spanners

Post by gwt181 »

Thank you
Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: Fan Clutch Spanners

Post by Largemouthlou »

Great file!! Thanks
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
dustyscustomwelding
1 Star Member
1 Star Member
Posts: 11
Joined: Sat Mar 26, 2016 11:18 pm
Location: South Dakota
Contact:

Re: Fan Clutch Spanners

Post by dustyscustomwelding »

I just cut and used these! AMAZING! Thank you so much!
Dusty
Owner
Dusty's Custom Welding and Fabrication
https://www.facebook.com/Dustyscustomwelding/
teachag
1 Star Member
1 Star Member
Posts: 17
Joined: Sun Nov 03, 2013 11:16 pm
Location: Linden California

Re: Fan Clutch Spanners

Post by teachag »

What thickness of metal do you use? I was thinking of 10 ga. Thank you
MetalTorcher
3 Star Member
3 Star Member
Posts: 450
Joined: Sun Sep 08, 2013 2:17 pm
Location: Manitoba

Re: Fan Clutch Spanners

Post by MetalTorcher »

teachag wrote:What thickness of metal do you use? I was thinking of 10 ga. Thank you
I would go with 1/4" or 3/16" at the very least. I'd be afraid 10 ga might spread apart. Some of those fan clutches can be pretty tight!
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Fan Clutch Spanners

Post by little blue choo »

Teachag, I would use tool steel if possible. I cut one out of 1/4 and it spread the first time I used it. Like MetalTorcher said they can be pretty tight. Mine was on a diesel. It worked but I had to use my MAC TOOL one to put it back. Thank goodness I just cut one to try.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Binderman
2 Star Member
2 Star Member
Posts: 81
Joined: Wed Jan 07, 2015 7:15 pm
Location: North Central Texas.

Re: Fan Clutch Spanners

Post by Binderman »

Saved and cut just the 2" one. Added a handle to it and it worked like a charm.

Many thanks!!!
ggeh
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 319
Joined: Thu Mar 31, 2016 2:51 pm

Re: Fan Clutch Spanners

Post by ggeh »

rockstar metalworks wrote:It's for using an air hammer to break the fan nut loose and tighten it without having to hold the fan clutch from rotating. Just put the wrench on in the right orientation and put your air hammer in the hook, hit it with a couple of quick bursts from the air hammer and the fan will come loose. Great tools. Built one for a buddy of mine that works for GM and he loves it. You can also add in your initials when cutting just to guarantee it doesn't find a new home!

Can you post a picture of the air hammer being used with the wrench. I know you explained it above but I just cant picture it. Some times I need to see it being used to understand it.

Thanks Gary
rmac
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Thu Dec 25, 2014 10:07 am

Re: Fan Clutch Spanners

Post by rmac »

The dxf. file is not downloading onto my computer. How do I download?

thanks!
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 807
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Fan Clutch Spanners

Post by Scratch »

ggeh wrote:
rockstar metalworks wrote:It's for using an air hammer to break the fan nut loose and tighten it without having to hold the fan clutch from rotating. Just put the wrench on in the right orientation and put your air hammer in the hook, hit it with a couple of quick bursts from the air hammer and the fan will come loose. Great tools. Built one for a buddy of mine that works for GM and he loves it. You can also add in your initials when cutting just to guarantee it doesn't find a new home!

Can you post a picture of the air hammer being used with the wrench. I know you explained it above but I just cant picture it. Some times I need to see it being used to understand it.

Thanks Gary
You'll have to use the correct chisel tip but here's how you would use it:
Image
I think I'm the oldest 10 year old boy on the forum...
ggeh
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 319
Joined: Thu Mar 31, 2016 2:51 pm

Re: Fan Clutch Spanners

Post by ggeh »

A pictures worth a thousand words. Thanks for taking the time, very helpful I get it now.
Thanks, Gary
RONWB
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 370
Joined: Sun Jul 13, 2014 12:49 pm

Re: Fan Clutch Spanners

Post by RONWB »

thanks
Lanemfg
1 Star Member
1 Star Member
Posts: 23
Joined: Sun May 06, 2018 1:59 pm
Location: lanemanufacturing.com
Contact:

Re: Fan Clutch Spanners

Post by Lanemfg »

simply wonderful!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”