First Completed Project-Gate
-
- 1 Star Member
- Posts: 20
- Joined: Sun Jun 29, 2014 12:18 pm
First Completed Project-Gate
Several months ago a friend got a CNC plasma table, for the longest time we had nothing but problems. Thanks to the file sharing section here we learned a lot by downloading files and practicing. Then we started reading several posts and learned even more. We then started talking with acourtjester and he spent a LOT of hours on the phone with us walking us through things and helping us. As of today we were able to finish our first large project and I wanted to take a minute and share some pictures.
And AGAIN thank you to EVERYONE that has helped us get were we are now.
And AGAIN thank you to EVERYONE that has helped us get were we are now.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- chasxjs
- 2.5 Star Elite Contributing Member
- Posts: 225
- Joined: Sun Aug 24, 2014 10:50 pm
- Location: Lake Havasu City, Arizona
Re: First Completed Project
Nice job.
Charles
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7870
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: First Completed Project
Very nice finish Perseverance pays off Now back to work!!!
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
Re: First Completed Project
Beautiful
-
- 3 Star Member
- Posts: 307
- Joined: Fri Dec 21, 2012 5:21 pm
Re: First Completed Project
Nice! Where are you from as I saw a pic of this exact gate on craigs list advertising under the Farm section earlier today in Tulsa, Oklahoma area which is where I'm from. Are you an Okie or is someone using your design pics to advertise with or what, just wondering as I also make custom gates??? I was amazed when I saw your pics of these gates here and also saw the exact same gate when I was cruising around on craigs list earlier today. Not making any accusations or anything but thought you might like to know someone has a pic of these gates and is using them to advertise their gate building services..... I use craigs list and would be upset if someone used one of my gates or entryways as a source of advertising for business when they didn't design or build them.
-
- 1 Star Member
- Posts: 20
- Joined: Sun Jun 29, 2014 12:18 pm
Re: First Completed Project
cbassjr wrote:Nice! Where are you from as I saw a pic of this exact gate on craigs list advertising under the Farm section earlier today in Tulsa, Oklahoma area which is where I'm from. Are you an Okie or is someone using your design pics to advertise with or what, just wondering as I also make custom gates??? I was amazed when I saw your pics of these gates here and also saw the exact same gate when I was cruising around on craigs list earlier today. Not making any accusations or anything but thought you might like to know someone has a pic of these gates and is using them to advertise their gate building services..... I use craigs list and would be upset if someone used one of my gates or entryways as a source of advertising for business when they didn't design or build them.
Hey cbassjr, yes we are located in near Durant, Oklahoma. Yes my friend who I do this with posted those on Craiglist. I can honestly say we both appreciate you looking out for that. This was our first custom gate, with out the people that i mentioned help we would have never gotten this far so had to share it.
-
- 3 Star Member
- Posts: 273
- Joined: Sat Oct 06, 2012 7:16 pm
Re: First Completed Project
Very nice.....keep up the good work!
-
- 3.5 Star Elite Contributing Member
- Posts: 520
- Joined: Fri Nov 14, 2008 10:20 am
Re: First Completed Project
StumblingAcres wrote:cbassjr wrote:Nice! Where are you from as I saw a pic of this exact gate on craigs list advertising under the Farm section earlier today in Tulsa, Oklahoma area which is where I'm from. Are you an Okie or is someone using your design pics to advertise with or what, just wondering as I also make custom gates??? I was amazed when I saw your pics of these gates here and also saw the exact same gate when I was cruising around on craigs list earlier today. Not making any accusations or anything but thought you might like to know someone has a pic of these gates and is using them to advertise their gate building services..... I use craigs list and would be upset if someone used one of my gates or entryways as a source of advertising for business when they didn't design or build them.
Hey cbassjr, yes we are located in near Durant, Oklahoma. Yes my friend who I do this with posted those on Craiglist. I can honestly say we both appreciate you looking out for that. This was our first custom gate, with out the people that i mentioned help we would have never gotten this far so had to share it.
Where at near Durant? I'm in Tishomingo.
-
- 2 Star Member
- Posts: 63
- Joined: Wed Jan 11, 2017 8:23 am
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: First Completed Project-Gate
Nice Work and Good Looking out acourtjester. He has answered questions of mine over the years. Wealth of Information!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
-
- 3.5 Star Elite Contributing Member
- Posts: 593
- Joined: Thu May 12, 2011 4:28 pm
Re: First Completed Project-Gate
Very tasteful! Good work!
-
- 2.5 Star Member
- Posts: 163
- Joined: Tue Apr 19, 2016 10:29 pm
- Location: In the way.
Re: First Completed Project-Gate
That has class.
David
David
-
- 3 Star Member
- Posts: 313
- Joined: Tue Jul 28, 2009 11:23 pm
- Location: Weiser, ID
- Contact:
Re: First Completed Project-Gate
That looks awesome, great job.
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: First Completed Project-Gate
For reference, what plasma cnc table (brand, model, etc.) and what Plasma cutter (brand, model)? Jim Colt Very nice work on the gate by the way!
StumblingAcres wrote:Several months ago a friend got a CNC plasma table, for the longest time we had nothing but problems. Thanks to the file sharing section here we learned a lot by downloading files and practicing. Then we started reading several posts and learned even more. We then started talking with acourtjester and he spent a LOT of hours on the phone with us walking us through things and helping us. As of today we were able to finish our first large project and I wanted to take a minute and share some pictures.
And AGAIN thank you to EVERYONE that has helped us get were we are now.