Cutting more than one sheet metal at a time
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Cutting more than one sheet metal at a time
Just kind of wondering can you cut two or more sheets of steel at one time? Haven't try yet just wondering! NEWBIE here!
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Cutting more than one sheet metal at a time
Yes, as long as there is no air gap between the sheets it works fine. I have seen ten layers of .125" aluminum cut simultaneously with good quality. They were 12' diameter and the company used a steel weight that kept the aluminum sheets tightly stacked.
Jim Colt Hypertherm
Jim Colt Hypertherm
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1707
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: Cutting more than one sheet metal at a time
Myself.. not had alot of luck with doing it. welded areas together on the fine art pieces..
where there are arcs or say areas your plasma slows down for. That will be the problem area
where there are arcs or say areas your plasma slows down for. That will be the problem area