the good news . I found it.
the bad news. CM-33 is $209.85 for a 5 gallon pail and it can ship UPS Ground
$30.00+ a gallon for 55 gallon barrel
plasma table antifreeze good news/bad news
-
- 3.5 Star Member
- Posts: 541
- Joined: Sun Feb 10, 2013 3:13 pm
- Location: mich.
plasma table antifreeze good news/bad news
Arclight 4x4
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
-
- 3 Star Member
- Posts: 329
- Joined: Wed Dec 26, 2012 6:13 am
Re: plasma table antifreeze good news/bad news
Thanks! Is there a mix ratio or should that be used without mixing?
Here might be an option - Possible not to be used when cutting aluminum, but not sure:
http://store.cyberweld.com/lowconan.html
Paul
Here might be an option - Possible not to be used when cutting aluminum, but not sure:
http://store.cyberweld.com/lowconan.html
Paul
-
- 3.5 Star Member
- Posts: 541
- Joined: Sun Feb 10, 2013 3:13 pm
- Location: mich.
Re: plasma table antifreeze good news/bad news
Thanks.Paul
the cms is 30% for 10 degrees and you have to do a 5 gallon bucket to order .
do you know the ratio for youre brand ?
thanks
al
maybe there is hope![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
the cms is 30% for 10 degrees and you have to do a 5 gallon bucket to order .
do you know the ratio for youre brand ?
thanks
al
maybe there is hope
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Arclight 4x4
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
-
- 3.5 Star Member
- Posts: 541
- Joined: Sun Feb 10, 2013 3:13 pm
- Location: mich.
Re: plasma table antifreeze good news/bad news
I haven't got a reply back from miller yet.urbnsr wrote:Thanks! Is there a mix ratio or should that be used without mixing?
Here might be an option - Possible not to be used when cutting aluminum, but not sure:
http://store.cyberweld.com/lowconan.html
Paul
but from all my research I am pretty sure this is for engine driven machines.
not for table water.
Arclight 4x4
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
-
- 3 Star Member
- Posts: 329
- Joined: Wed Dec 26, 2012 6:13 am
Re: plasma table antifreeze good news/bad news
Sorry - Wasn't sure.
When I saw the "Plasma" on the jug, I must have just assumed.
When I saw the "Plasma" on the jug, I must have just assumed.
Last edited by urbnsr on Thu Dec 12, 2013 8:35 pm, edited 1 time in total.
-
- 3.5 Star Member
- Posts: 541
- Joined: Sun Feb 10, 2013 3:13 pm
- Location: mich.
Re: plasma table antifreeze good news/bad news
no problem,
I just didn't want anyone trying it.
miller contacted me. the antifreeze is for engines only
thanks for trying. that was a hard search.
on to plan c .
heated bladder tank. the build should be easy . will post pictures next week . after are little snow storm.
I just didn't want anyone trying it.
miller contacted me. the antifreeze is for engines only
thanks for trying. that was a hard search.
on to plan c .
heated bladder tank. the build should be easy . will post pictures next week . after are little snow storm.
Arclight 4x4
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set