Fathers Day - Dad's Garage Sign
- sewester
- 1 Star Member
- Posts: 12
- Joined: Sat Aug 11, 2012 11:43 pm
- Location: Washington
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
nice work thank you
-
- 2.5 Star Member
- Posts: 181
- Joined: Wed Jan 20, 2010 6:55 pm
- Location: Canada
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
Thank you:) Hope to use it sometime.
-
- 1.5 Star Member
- Posts: 48
- Joined: Thu Dec 13, 2012 11:49 pm
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
hello!! I am new to this CNC world, and I tried to nest this file on the program I received with my table, and it shows two signs,side by side, and says there are collisions !! Seems like every time I try to do a file like this , my program makes a big issuse of it!!!Like I said I am new at this!! Probably missing something!!! lol
It is an awsome sign!!! I hope I can figure it out some day!!!! Thanks Jason,fine work!!!
Bob
It is an awsome sign!!! I hope I can figure it out some day!!!! Thanks Jason,fine work!!!
Bob
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
You will find that a lot of Jason's signs have two versions, the one on the left is usually the plasma cutting file deigned with open paths to cut at about the size it is, the one on the right provides looped paths to make it more suitable for laser or water jet which has a much smaller kerf or to be plasma cut much larger.
Murray
Murray
-
- 1.5 Star Member
- Posts: 48
- Joined: Thu Dec 13, 2012 11:49 pm
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
Thanks Murray!! How do i choose one or the other?? when i try to convert it i dont get a choice,that i know of!!! lol my Nessting program is IBE cnc cut, a German made program!!!
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2643
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
Here you go. Didn't know which one you wanted so I attached both of them.bobrl wrote:Thanks Murray!! How do i choose one or the other?? when i try to convert it i dont get a choice,that i know of!!! lol my Nessting program is IBE cnc cut, a German made program!!!
Larry
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 48
- Joined: Thu Dec 13, 2012 11:49 pm
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
Thanks Larry !!!
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
That's the great part about here, always plenty of help.
I usually bring them into Corel and just delete the one I don't need. I also do a bit of a check to make sure the ends of open paths are far enough away from other lines so as to avoid blow throughs.
Murray
I usually bring them into Corel and just delete the one I don't need. I also do a bit of a check to make sure the ends of open paths are far enough away from other lines so as to avoid blow throughs.
Murray
-
- 1.5 Star Member
- Posts: 26
- Joined: Fri Apr 06, 2012 1:59 pm
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
This is how I used your drawing. I hope you don?t mind that I changed it for better suit my interest. The text says ?Magnus playhouse? and ?Repair shop? in Swedish.
Many thanks
/Magnus
Many thanks
/Magnus
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- FreeDXF.com
- 2.5 Star Member
- Posts: 145
- Joined: Mon Mar 23, 2009 11:49 am
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
Very cool modification of the design work. I like to see people use what I provide and customize it to fit their needs the best! Thanks for sharing. Awesome job! JH
- FreeDXF.com
- 2.5 Star Member
- Posts: 145
- Joined: Mon Mar 23, 2009 11:49 am
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
Very cool modification of the design work. I like to see people use what I provide and customize it to fit their needs the best! Thanks for sharing. Awesome job! JH
-
- 1 Star Member
- Posts: 10
- Joined: Tue May 08, 2012 3:44 pm
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
I just gotta work on putting a Mustang in the middle and I plan on donating this to the local chicago based club for their season opener....Thanks a bunch, amazing sign!
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
Here's a few from some of your recent files so generously donated here Jason,jasonsmetaldesign wrote:Very cool modification of the design work. I like to see people use what I provide and customize it to fit their needs the best! Thanks for sharing. Awesome job! JH
Sean has an A tudor but fully fendered and running a late model Holden engine and hood top.
This was a birthday present for the guy who has everything including a custom '58 Biscane ordered by his wife, backlit with mica facing
Open faced and backlit
Another take on the 'one above with a '32 coupe and a more Aussie backdrop, again open faced and backlit
A raffle donation to the Renegades Hot Rod Club, painted silver marblizer over a black base.
thanks again
Murray
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: PlasmaSpider DXF of the Week - Dad's Garage Sign
Thanks for sharing Jason
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
-
- 3 Star Member
- Posts: 311
- Joined: Fri Oct 31, 2014 8:50 am
- Location: East Tennessee
Re: Fathers Day - Dad's Garage Sign
Nice work Jason, thanks for sharing.
-
- 2.5 Star Member
- Posts: 123
- Joined: Wed Jun 01, 2016 5:57 pm
Re: Fathers Day - Dad's Garage Sign
Very cool.
Thanks.
Thanks.
Best Regards,
Mike Volpone
MJV Graphics
CorelDraw X7
SolidWorks 2014
Coming soon: ShopSabre SideKick 8 w/ 6" Pipe Attachment
and HyperTherm 105
Mike Volpone
MJV Graphics
CorelDraw X7
SolidWorks 2014
Coming soon: ShopSabre SideKick 8 w/ 6" Pipe Attachment
and HyperTherm 105
- david jordan
- 3.5 Star Member
- Posts: 671
- Joined: Sun Jul 06, 2014 2:21 pm
Re: Fathers Day - Dad's Garage Sign
Thank you, very nice.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
-
- 1.5 Star Member
- Posts: 42
- Joined: Mon Jul 13, 2015 6:55 pm
Re: Fathers Day - Dad's Garage Sign
Thanks Jason!
-
- 2 Star Member
- Posts: 85
- Joined: Mon Aug 06, 2012 9:29 pm
Re: Fathers Day - Dad's Garage Sign
Awesome file! Thank you, Jason.
5 x 10 Air bladder water table
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
-
- 1.5 Star Member
- Posts: 47
- Joined: Fri May 22, 2009 11:44 am
Re: Fathers Day - Dad's Garage Sign
thank you for sharing Jason............. DJS in Texas
-
- 3 Star Member
- Posts: 296
- Joined: Wed Apr 01, 2015 10:30 pm
- Location: Watkins, Iowa
Re: Fathers Day - Dad's Garage Sign
Fantastic file, thanks for sharing.
-
- 2 Star Member
- Posts: 66
- Joined: Mon Jul 13, 2015 5:07 pm
Re: Fathers Day - Dad's Garage Sign
Thank you for the cool design. I cant wait to give it try
- david jordan
- 3.5 Star Member
- Posts: 671
- Joined: Sun Jul 06, 2014 2:21 pm
Re: Fathers Day - Dad's Garage Sign
Looks great, thank you.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
-
- 1.5 Star Member
- Posts: 48
- Joined: Mon Aug 29, 2016 8:43 am
Re: Fathers Day - Dad's Garage Sign
thats freaken sweet.wow....thank you
-
- 1/2 Star Member
- Posts: 8
- Joined: Mon Sep 21, 2009 10:37 am
Re: Fathers Day - Dad's Garage Sign
Thanks so much this will look awesome at the shop.