Help with Bulk Pricing Motor Mounts

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
prattswelding
2 Star Member
2 Star Member
Posts: 84
Joined: Wed Jun 15, 2011 2:07 pm

Help with Bulk Pricing Motor Mounts

Post by prattswelding »

I have a customer wanting motor mounts cut from 1/4" sheet. He has all the DXF files needed, the project will use 17.5 sq/ft of material. He needs 140 pieces cut, 500 pierce marks, and 2587 inches of cut. The price I came up with was $429.92 before tax ($3.07 per cut piece). I was wondering how far off I am on my figures if anyone has any insight. Thanks.

-Brian
plain ol Bill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 689
Joined: Fri Aug 15, 2008 6:22 pm
Location: Tenino,WA

Re: Help with Bulk Pricing Motor Mounts

Post by plain ol Bill »

Brian my quick (stress quick) shows .25 per pierce and .12 per linear inch of cut. I would be real close to the same price.
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”