help with file
-
- 2.5 Star Member
- Posts: 202
- Joined: Sun Jan 24, 2010 7:27 am
help with file
hi all
need some help makin this file cuttable to go onto a gate probably end up 600 wide
im just to busy atm and probably out of my league anyway
any help appreceated
fergy
need some help makin this file cuttable to go onto a gate probably end up 600 wide
im just to busy atm and probably out of my league anyway
any help appreceated
fergy
-
- 4 Star Member
- Posts: 898
- Joined: Thu Sep 03, 2009 10:43 am
Re: help with file
Hope this helps!
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 202
- Joined: Sun Jan 24, 2010 7:27 am
Re: help with file
thanks metal art that helps heaps
will try to sit down with it this weekend
cheers fergy
will try to sit down with it this weekend
cheers fergy
-
- 4 Star Member
- Posts: 881
- Joined: Fri Dec 03, 2010 7:57 pm
- Location: SE TX
Re: help with file
This time I will ask for y'all's help, to help with the hurricane.
I will match all proceeds from my 2D Treats series (where this is), and see that it goes to someone or to a church in Louisiana through the end of the year.
I may go there myself. It was a blessing to haul supplies for north Louisiana churches after Katrina and Rita and help recover flooded homes after Ike.
Otherwise, please donate something to somewhere to help. After the hurricane, when the heat sets in is when it gets rough and the suffering has just begun. I know. Hurricane Rita actually set the stage for me to stumble into making vector graphics in the first place. Please try to help someone affected by the disaster, it will mean the world to them.
I will match all proceeds from my 2D Treats series (where this is), and see that it goes to someone or to a church in Louisiana through the end of the year.
I may go there myself. It was a blessing to haul supplies for north Louisiana churches after Katrina and Rita and help recover flooded homes after Ike.
Otherwise, please donate something to somewhere to help. After the hurricane, when the heat sets in is when it gets rough and the suffering has just begun. I know. Hurricane Rita actually set the stage for me to stumble into making vector graphics in the first place. Please try to help someone affected by the disaster, it will mean the world to them.
-
- 2.5 Star Member
- Posts: 202
- Joined: Sun Jan 24, 2010 7:27 am
Re: help with file
THANKS Gary that certanly looks the goods will cut out next week
took up your offer the donation and brought all the ones without deer and wolves in them(not a big thing down here)
BUT if you can do a bull/steer skull in front of them guns put me down for one
Cheers Fergy
took up your offer the donation and brought all the ones without deer and wolves in them(not a big thing down here)
BUT if you can do a bull/steer skull in front of them guns put me down for one
Cheers Fergy
-
- 4 Star Member
- Posts: 881
- Joined: Fri Dec 03, 2010 7:57 pm
- Location: SE TX
Re: help with file
one? how about nine new designs...?fergy wrote:if you can do a bull/steer skull in front of them guns put me down for one
-
- 3 Star Member
- Posts: 487
- Joined: Sun Mar 27, 2011 10:13 pm
Re: help with file
Gary, I'll be getting some of these files.
Thanks, Dawg
Thanks, Dawg
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1671
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: help with file
How about a bundle price?
Can't hurt to ask.
Can't hurt to ask.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 4 Star Member
- Posts: 881
- Joined: Fri Dec 03, 2010 7:57 pm
- Location: SE TX
Re: help with file
click heretnbndr wrote:How about a bundle price?
Can't hurt to ask.
-
- 2.5 Star Member
- Posts: 202
- Joined: Sun Jan 24, 2010 7:27 am
Re: help with file
cheers thats what i was looking for
will be sure to get them when i get home tonight
while we are on the subject of me gettin the stuff i want was lookin a while ago for a pic of a
bloke on a harley with sort of not too much cutout detail (bold sort of lines)
but with the pic sort of flowing out behind him with large flames
do ya get what i mean
only if you got time
cheers fergy
will be sure to get them when i get home tonight
while we are on the subject of me gettin the stuff i want was lookin a while ago for a pic of a
bloke on a harley with sort of not too much cutout detail (bold sort of lines)
but with the pic sort of flowing out behind him with large flames
do ya get what i mean
only if you got time
cheers fergy
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1671
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: help with file
Thanks Gary. Made my purchase but get this message when I try to download.
I will try again later.You supplied valid download key, but system failed to find distribution package , please contact the shop administration
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 4 Star Member
- Posts: 881
- Joined: Fri Dec 03, 2010 7:57 pm
- Location: SE TX
Re: help with file
sorry, my bad, I mistyped the filename, the download link should work now....
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1671
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: help with file
Gary:
The link worked and I purchased the files. But when I click the little download button on the order it takes me to another screen with the dxf file pics and when I click "download" at the bottom I get the message I posted above.
Thanks
The link worked and I purchased the files. But when I click the little download button on the order it takes me to another screen with the dxf file pics and when I click "download" at the bottom I get the message I posted above.
Thanks
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 4 Star Member
- Posts: 881
- Joined: Fri Dec 03, 2010 7:57 pm
- Location: SE TX
Re: help with file
heck again, I usually don't have to type in the file path by hand, now it was missing a slash
this time I fully tested it by actually downloading it and it appears to be working.... finally... maybe...
this time I fully tested it by actually downloading it and it appears to be working.... finally... maybe...