I made this yesterday and thought it worked pretty well so I wanted to post it in case someone else was running into the same problem I was. I needed a wall mount for my Argon/Co2 cylinder and the stuff online was too expensive or not really what I wanted so I decided to make my own. Have plasma cutter, why not, right?
This fits a 7" cylinder (snug fit) and I split some tubing to make a cushion for the edges. You can make it larger or smaller to fit the size tank you are using. The strap came from Lowe's and cost $7.00 for 2.
The only down side is, I created it in PlasmaCam so the file is a .pcm. If that is what you have, great. If there is someone out there that can convert it to a .dxf, more will be able to use it.
Thanks
Richard
![Image](http://www.plasmaspider.com/images/GasWallBracket.png)
![Image](http://www.plasmaspider.com/images/gas-cylinder-wall-bracket-P.jpg)
![Image](http://www.plasmaspider.com/images/gas-cylinder-wall-bracket-P2.jpg)