Garden Sundial DXF FIle
- SCHIDTHEAD
- 3 Star Member
- Posts: 275
- Joined: Fri Jan 08, 2010 12:28 am
- Location: Under a Hood
Garden Sundial DXF FIle
Been pokin in on short grab and go's...been too busy to interact, but posted some pics tonight and thought id share the file of a sundial I have been selling while I was on. Enjoy and thanks for all the ideas, files, and input on here to every one of you who contribute...this files for you.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Garden Sundial
Thanks so much for that, fantastic piece as are most if not all of yours, your talents and efforts are much appreciated.
I'm not sure that I qualify for being eligible as I haven't really contributed may files but have tried to contribute with other help where possible. I have a few bits coming soon but I'm still a long way from creating a design like yours.
Thanks again
Murray
I'm not sure that I qualify for being eligible as I haven't really contributed may files but have tried to contribute with other help where possible. I have a few bits coming soon but I'm still a long way from creating a design like yours.
Thanks again
Murray
-
- 2.5 Star Member
- Posts: 178
- Joined: Mon Aug 01, 2011 6:22 pm
Re: Garden Sundial
Excellent job thanks for sharing
-
- 4 Star Member
- Posts: 896
- Joined: Thu Sep 03, 2009 10:43 am
Re: Garden Sundial
Verrry nice, thanks for sharing1
-
- 2.5 Star Elite Contributing Member
- Posts: 233
- Joined: Wed Feb 02, 2011 5:15 pm
- Location: Santa Anna Texas
- Contact:
Re: Garden Sundial
Very nice. Thank You Very Much.
Mike
Mike
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
-
- 2 Star Elite Contributing Member
- Posts: 86
- Joined: Wed Jul 13, 2011 6:15 pm
Re: Garden Sundial
VERY NICE!!!
- hdfaster
- 3.5 Star Elite Contributing Member
- Posts: 501
- Joined: Thu Jan 07, 2010 11:38 pm
Re: Garden Sundial
Great item, thank you!
-
- 2 Star Member
- Posts: 93
- Joined: Wed Mar 30, 2011 10:10 pm
Re: Garden Sundial
This is very good work!!
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Garden Sundial
nice work thanks for sharing
Carlos
Carlos
Last edited by ctorres3120 on Sun Apr 29, 2012 12:26 pm, edited 1 time in total.
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- 4R8
- 2.5 Star Member
- Posts: 167
- Joined: Fri Jul 08, 2011 6:50 pm
Re: Garden Sundial
WOW, now that's awesome! Thanks a bunch for that!
- Diverdude
- 2 Star Member
- Posts: 65
- Joined: Sun Jan 01, 2012 7:54 pm
- Location: Alabama Gulfcoast
-
- 1 Star Member
- Posts: 24
- Joined: Wed Aug 31, 2011 11:34 am
Re: Garden Sundial
Thank you very much. Nice work. Do you mind telling us how much this sundial sells for? Len
- Sampson Jones
- 3 Star Elite Contributing Member
- Posts: 333
- Joined: Mon Jul 25, 2011 9:30 pm
Re: Garden Sundial
Thanks !
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
Re: Garden Sundial
I have to agree with Murray! You do AWESOME work! And the posting part I to am guilty, I've not been able to work with my machine as much as I want for my real job gets in the way but I'll get something up in the near future. Again nice work and thanks for the file.
Bob
Bob
The older I get, The better it was!
-
- 1.5 Star Member
- Posts: 28
- Joined: Wed Mar 11, 2009 6:26 am
Re: Garden Sundial
very nice looking,is there any way someone could post it in dxf?my com. will not open the zip file
thanks
thanks
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1677
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Garden Sundial
If you download the file, then locate it in your windows explorer, click on the file to highlight, right click and select "extract here" the file will "unzip" to reveal the dxf file.in dxf?my com. will not open the zip file
Don't know what version of windows you are runnning but unzip has been available forever.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1707
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: Garden Sundial
nice project, thanks for sharing
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1677
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Garden Sundial
I will repeat the question. How much do you sell these for? Are you powder coating or just rattle can spraying?Thank you very much. Nice work. Do you mind telling us how much this sundial sells for?
Thanks
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 3.5 Star Member
- Posts: 547
- Joined: Tue May 25, 2010 11:42 am
Re: Garden Sundial
You wouldnt have that in a DXF file?
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1677
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Garden Sundial
The .zip contains the .dxf file. You need to download it and unzip it on your computer. The zip allows the compression of larger files for uploading.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- SCHIDTHEAD
- 3 Star Member
- Posts: 275
- Joined: Fri Jan 08, 2010 12:28 am
- Location: Under a Hood
Re: Garden Sundial
TNBNDR I am getting $320 for these raw, $360 prep'd and primered and $410 powdercaoted. They will test your welding geometry skills getting everything aligned, even and level, but I have it down to just at 2 hrs to piece them together with my new jig after removing millscale and a quick sand blast of all parts.tnbndr wrote:I will repeat the question. How much do you sell these for? Are you powder coating or just rattle can spraying?Thank you very much. Nice work. Do you mind telling us how much this sundial sells for?
Thanks
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776
- SCHIDTHEAD
- 3 Star Member
- Posts: 275
- Joined: Fri Jan 08, 2010 12:28 am
- Location: Under a Hood
Re: Garden Sundial
Oh...and for all of you who are considerate enough to say thanks, you are more than welcome. I hope you can make more than a few bucks off this.
***ALSO--this dial is set at 38.85? N as with the gnomon, so if you want it to keep accurate time for your location, the dial angles and the gnomon have to be set to your latitude.
***ALSO--this dial is set at 38.85? N as with the gnomon, so if you want it to keep accurate time for your location, the dial angles and the gnomon have to be set to your latitude.
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776
-
- 2 Star Elite Contributing Member
- Posts: 94
- Joined: Fri Dec 17, 2010 7:16 am
Re: Garden Sundial
Amazing. Thanks
I just wished someone makes one that I can use in NY....
I just wished someone makes one that I can use in NY....
-
- 2.5 Star Member
- Posts: 121
- Joined: Fri Jun 10, 2011 6:30 pm
Re: Garden Sundial
great art work. but use corel 13 and when i try opening the file it pops up saying there was a virtual problem. can anyone help ?
-
- 3 Star Member
- Posts: 470
- Joined: Thu Mar 03, 2011 12:06 am
- Location: Maine
Re: Garden Sundial
Wow! Downloaded 246 times...
Thank you!
Thank you!