Looking for a trivet......
-
- 1/2 Star Member
- Posts: 3
- Joined: Thu Sep 24, 2009 10:39 am
Looking for a trivet......
Looking for a dxf file for a trivet if anyone has any they would like to share.......? Thanks.
-
- 2 Star Member
- Posts: 51
- Joined: Fri Mar 27, 2009 9:10 pm
- Location: Lodi, CA.
Re: Looking for a trivet......
Here is a drawing of a base for a special requested item I drew up last week . You can eliminate the center hole. I
heated and bent the feet on the perimeter down at 90 degrees. Marty
![Image](http://www.plasmaspider.com/images/trivet-standbase.jpg)
heated and bent the feet on the perimeter down at 90 degrees. Marty
![Image](http://www.plasmaspider.com/images/trivet-standbase.jpg)
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Elite Contributing Member
- Posts: 126
- Joined: Sat May 30, 2009 5:12 pm
- Location: Saint Louis, Missouri U.S.A.
Re: Looking for a trivet......
This is one I use alot. I spot weld 1/2" steel balls at the corners. You could add the fold down legs. The think the balls look better. Mike
![Image](http://www.plasmaspider.com/images/trivet-standbase2.jpg)
![Image](http://www.plasmaspider.com/images/trivet-standbase2.jpg)
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1 Star Member
- Posts: 12
- Joined: Sat Oct 24, 2009 12:22 am
- Location: Hillsboro, MO
- Contact:
Re: Looking for a trivet......
What material and thickness do you guys use on those?
Thanks
Thanks
-
- 2.5 Star Elite Contributing Member
- Posts: 126
- Joined: Sat May 30, 2009 5:12 pm
- Location: Saint Louis, Missouri U.S.A.
Re: Looking for a trivet......
I like using 10 or 11 gage steel.
Mike
Mike