Five PlasmaCam GO TORCH Machines for Sale

[Joe Jones]

I am shifting gears now. So I have five brand new GO TORCH machines to sell. I was going to set them all up with the proper software, and run routers on them, or use them in a Bed and Breakfast PlasmaCam weekend Seminar setting, but I am moving on now.

I have lasers and 3D printers, so my plasma operations are all on the back burner now.

I would include insured shipping with a tracking number on every machine. OR you can pick one up here, if you are local to me near Franklin, KY.

I am asking $3,400.00 for the new machines delivered to your door, and they come with the BASIC DesignEdge software. I will assist you in registering them with PlasmaCam.

IF you are interested in making them larger, I have a 'YUGE assortment of 4x4 and 510 frames, rails, gantries, and other parts. you could add the CSU Customizable Size Upgrade to your machine, and I will sell you the table components necessary to make your GO TORCH larger!

I also have many components for anyone who wants to convert their 4x4 into a 4x8 table as well.

Joe

http://www.gotorch.com/

[1MORECUT]

If the tables are still in the box, $3,400 is a good price. A new one from GOTORCH is $4100.00 shipped.

John

[Joe Jones]

CORRECTION! PlasmaCam DOES NOT INCLUDE Basic DesignEdge software with their Go Torch machines, so you would only get the software that allows you to have the one single feature: BASIC MACHINE CONTROL for cutting .dxf files. I apologize for the confusion! If you want BASIC or Advanced DesignEdge software, you will have to purchase it for your GoTorch license.

Joe

[Joe Jones]

I will reduce the price to $3,200.00 today. This includes insured shipping with a tracking number.

If you are local to Franklin, KY. and YOU can pick it up, the price is then only $3,000.00!

These are BRAND NEW machines.

Joe

[adbuch]

If the tables are still in the box, $3,400 is a good price. A new one from GOTORCH is $4100.00 shipped.

John

New GoTorch comes with a 1 year warranty. Even though these have not been used, I expect the warranty has expired. In the event of a problem with the controller - it could get expensive.

[1MORECUT]

The cost to fix the controller is $500.00

[Joe Jones]

If the tables are still in the box, $3,400 is a good price. A new one from GOTORCH is $4100.00 shipped.

John

New GoTorch comes with a 1 year warranty. Even though these have not been used, I expect the warranty has expired. In the event of a problem with the controller - it could get expensive.

Thanks for that. I SERIOUSLY doubt that there would be any issues with a brand new controller. A controller repair is $500.00, or sometimes a little more. That makes it STILL a good deal! Since PlasmaCam KNOWS that these machines have never been unpacked, I suspect I could convince them to renew the warranty on them.

By the way, the Go torch site is practically nonfunctional. They have disappeared from eBay too. I am doubting that they HAVE any new Go Torch machines left to sell. The NEW Go Torch machines will be on the same GENESIS platform as their 4x4, their 5x10, and eventually, their 4x8 models too.

Add to this, the fact that MY Go Torch machines come with free online training on the software and machine operation, something PlasmaCam NEVER offered.

Joe

[adbuch]

[Joe Jones]

Hmmm $3,200.00 with unlimited free online training vs. $4,135.00 for one year of warranty on a brand new controller that most likely will not fail in the first year. I believe smart people will see the value in my offer.

Joe

[Joe Jones]

D'Oh! I was moving things around in the shop today, and I ran across ANOTHER brand new GO TORCH machine that is still in the original shipping box. I forgot about it, and it had been lost among a 'YUGE pile of yet to be opened machines. So I guess I have SIX of them to sell.

I really want to sell these GO TORCH machines, so I am going to drop the price again, to $2,800.00 if you pick it up, and $3,000.00 shipped with insurance and a tracking number. I will provide the official Transfer of Ownership form to the buyer, so he or she can register it with PlasmaCam.

The GO TORCH comes with only "bare bones" software that lets you load a .dxf file into the machine and cut it manually. If you want DesignEdge software (Basic or Advanced level) that is an additional purchase directly from PlasmaCam, and of course the other upgrades are also sold separately.

Of course if you buy one from me, I am there for free online training on the software, as always.

I will even sweeten the deal a little more! I have lots of used PlasmaCam and Samson 510 parts, and as we all know ... "Parts is Parts!" If you buy a GO TORCH and you want to expand it to a 2x4 machine by extending the rails, or you want to convert it into a 4x4 size with the frame and legs and gantry, I will sell you the necessary table components to make that happen. I can keep the GO TORCH gantry and sell you a 4x4 gantry in place of it. I am flexible.

You would need to buy the Customizable Size Upgrade from PlasmaCam so your GO TORCH software can "see" the larger work area. I cannot do anything about that. But I do have parts ... LOTS of parts for these tables.

Joe

[AREA]

Man thats pretty good value for anyone looking to get into cnc plasma. Good luck with your sales.

[Joe Jones]

I originally bought them to set up a PlasmaCam / DesignEdge weekend training seminar side gig at my home for father and son, grandpa and grandson, mom and daughter, or whatever. I actually purchased four Samson 510 tables from PlasmaCam, when they had a 25% off sale. Buy three, get one free! Due to circumstances beyond my control, the plan was terminated, PlasmaCam refunded my 30-something thousand dollar payment on the Samson tables, and these new GO TORCH machines have been sitting here for a while. It is time to sell them and move on.

Joe

[adbuch]

Man thats pretty good value for anyone looking to get into cnc plasma. Good luck with your sales.

I like idea of a small portable cnc plasma cutter. I already have several of the Plasmacam tables (full Monte), so I am partial to Plasmacam. But I think the Arcdroid also looks very interesting and is also in the same price range.

David

[Joe Jones]

Man thats pretty good value for anyone looking to get into cnc plasma. Good luck with your sales.

I like idea of a small portable cnc plasma cutter. I already have several of the Plasmacam tables (full Monte), so I am partial to Plasmacam. But I think the Arcdroid also looks very interesting and is also in the same price range.

David

I've never had a chance to play with an Arcdroid, but it looks like fun.

Joe