Lincoln 625 - Broken pin at torch connector

Discussion forum for Lincoln & Miller plasma cutters
Post Reply
Daaguilar
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Mon Aug 05, 2024 8:28 pm

Lincoln 625 - Broken pin at torch connector

Post by Daaguilar »

Hi Team

My name is David Aguilar, I have a 625 Tomahawk plasma Cutter, unfortunately we were noticed that two pins that are located in the torch connector to the machine were broken and we need to replace them.

I try to order from Lincoln but they said that these pins are not sold separately

Do you know were can I find these pins?

Attached you can find some pictures of the Pin's and Connector

Thank You in advance for your support

DA
IMG_6844.jpg
IMG_6845.jpg
IMG_6848.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

weldguy
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2197
Joined: Fri Apr 17, 2009 11:48 am

Re: Lincoln 625 - Broken pin at torch connector

Post by weldguy »

It may be very difficult to find that exact pin, you may be best just to try and solder the 2 pieces back together. Let us know what you end up doing to fix that.
Jzulich
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Wed Oct 30, 2024 6:30 pm

Re: Lincoln 625 - Broken pin at torch connector

Post by Jzulich »

I fixed mine, removed the top male broken end i had to grind off the plastic to grab with pliers. Drilled a #53 hole 3/16” deep. Purchased 1/16 brass rod. Pressed in hole and cut off and dressed the end. Also i did find the complete part in china. Contact me for part number
Post Reply

Return to “Lincoln & Miller Plasma Cutters”