looking for someone to take this picture and turn it into a Cuttable DFX
DFX Help
-
Dozer
- 1/2 Star Member
- Posts: 3
- Joined: Sat Jan 28, 2023 2:30 am
DFX Help
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3375
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: DFX Help
Is there a Copyright on that design?
It is easy enough to draw with DesignEdge, but a photo of the entire surface would help the artist not need to GUESS at what is out of frame. Also, what are the dimensions? It looks to be about 20 inches wide.
Joe
It is easy enough to draw with DesignEdge, but a photo of the entire surface would help the artist not need to GUESS at what is out of frame. Also, what are the dimensions? It looks to be about 20 inches wide.
Joe
Bitten by the laser bug.
Now my PlasmaCAM tables fight for attention!
X-TOOL D1 PRO (x 4 ?
) w/20W, 40W and 2W-IR heads + accs
X-TOOL F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2)
LaserPecker 1 PRO, LP-2, LP-4 and accs
50 Watt GALVO fiber laser
TYVOK Spider S1 60W Diode Laser 49" x 96"
CreatBot D600 PRO 3D printer
Stratasys Fortus 400mc 3D Printer
Obscene Levels of Debt
No help.
FREE DesignEdge Training Via ZOOM!
Now my PlasmaCAM tables fight for attention!
X-TOOL D1 PRO (x 4 ?
) w/20W, 40W and 2W-IR heads + accsX-TOOL F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2)
LaserPecker 1 PRO, LP-2, LP-4 and accs
50 Watt GALVO fiber laser
TYVOK Spider S1 60W Diode Laser 49" x 96"
CreatBot D600 PRO 3D printer
Stratasys Fortus 400mc 3D Printer
Obscene Levels of Debt
No help.
FREE DesignEdge Training Via ZOOM!
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 9651
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: DFX Help
It will be best if you can provide a photo of the complete part looking straight on (not off at an angle). The higher the resolution, the better. For the best result, this one would most likely need to be manually traced. What software - if any - are you using to draw/edit your vector files?
David
David
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 9651
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: DFX Help
Where did you get the photo? If you know the owner of the part in the photo, then perhaps just ask them where they got the part from and see if you can purchase the original file. Otherwise - you will need a better photo of the entire piece and do a manual trace using Inkscape, CorelDraw, etc. There is also a section at this forum with a list of "hired guns" who would be able to create a cut-ready vector file for you.
viewtopic.php?t=27175
David
viewtopic.php?t=27175
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
