Might want to throttle it back a bit (I don't know what the stroke length is on these things), but would one of these work good for dross removal? Knocking the sharp points off at the edges would probably help keep it from scratching the metal badly.
https://www.amazon.com/Astro-Pneumatic- ... B000LQLGHY
Pneumatic gasket scraper for dross removal?
-
- 2 Star Member
- Posts: 89
- Joined: Thu Aug 08, 2024 5:41 pm
- Location: NE Oregon
- Contact:
-
- 6 Star Elite Contributing Member
- Posts: 9651
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Pneumatic gasket scraper for dross removal?
Something like one of these may be a better choice.jlasater wrote: ↑Sun Sep 08, 2024 11:10 pm Might want to throttle it back a bit (I don't know what the stroke length is on these things), but would one of these work good for dross removal? Knocking the sharp points off at the edges would probably help keep it from scratching the metal badly.
https://www.amazon.com/Astro-Pneumatic- ... B000LQLGHY
David
https://www.amazon.com/Astro-4320-In-Li ... 213&sr=8-1
https://www.amazon.com/PROSHI-Compact-n ... 213&sr=8-2
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 826
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Pneumatic gasket scraper for dross removal?
I’ve tried a needle scaler before. It didn’t seem to work well for me surprisingly.
Hopefully someone else has better results.
Hopefully someone else has better results.
I think I'm the oldest 10 year old boy on the forum...
-
- 3 Star Member
- Posts: 394
- Joined: Tue Sep 30, 2008 3:40 pm
Re: Pneumatic gasket scraper for dross removal?
Needle scaler never worked out well for me either. I use the muriatic acid bath technique for most of my stuff. Once I tried that I was sold on it.
-
- 2 Star Member
- Posts: 89
- Joined: Thu Aug 08, 2024 5:41 pm
- Location: NE Oregon
- Contact:
Re: Pneumatic gasket scraper for dross removal?
I have a needle scaler for stick welding. It works great for welding, but is like using a sledgehammer for dross clean up on sheetmetal/thin plate.
- ROKCRLER
- 3 Star Elite Contributing Member
- Posts: 643
- Joined: Sun Sep 30, 2018 5:19 pm
Re: Pneumatic gasket scraper for dross removal?
I tried the needle scaler, the multitool with various blades, flap disks, and knotted wire cups. The best method I've found is knotted wire cup and then 60 or 80 grit paper on a DA.
The other tools marked up the material and as you mentioned, does not work well on thin stuff.
I cut everything from 22ga - 3/4" and use the same cup and DA for all with good results.
The other tools marked up the material and as you mentioned, does not work well on thin stuff.
I cut everything from 22ga - 3/4" and use the same cup and DA for all with good results.
4x8 Dynatorch
PM85
~Mo~
PM85
~Mo~
-
- 6 Star Elite Contributing Member
- Posts: 9651
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Pneumatic gasket scraper for dross removal?
Same here - I use a knotted wire cup, flap discs, and d/a with 80 grit. I don't personally own either a pneumatic gasket scraper or needle scaler.ROKCRLER wrote: ↑Mon Sep 09, 2024 4:02 pm I tried the needle scaler, the multitool with various blades, flap disks, and knotted wire cups. The best method I've found is knotted wire cup and then 60 or 80 grit paper on a DA.
The other tools marked up the material and as you mentioned, does not work well on thin stuff.
I cut everything from 22ga - 3/4" and use the same cup and DA for all with good results.
David