3D Printer Extruder Stepper Motor

Topics related to 3d printers and 3d printed plasma table accessories.
Post Reply
paul22
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Mon Jul 01, 2024 2:49 am

3D Printer Extruder Stepper Motor

Post by paul22 »

Hi everyone,
I need to replace the extruder stepper motor for my 3D printer.
My question is: which one is better for prusa i3, 1.8 degree stepper motor or 0.9 degree stepper motor?
I have two options:
1. https://www.oyostepper.de/goods-54-Nem ... motor.html
2. https://www.oyostepper.de/goods-31-Nema ... motor.html
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7932
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 3D Printer Extruder Stepper Motor

Post by acourtjester »

Are you sure its the stepper and maybe not the controller board??? As to your selection I would try to find the spects on the stepper that is on the printer and go with a direct replacement. If you select the wrong one the calibrations for the feed may be off and effect the printing.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 9058
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: 3D Printer Extruder Stepper Motor

Post by adbuch »

I would have to agree with Tom. My best recommendation would be to reach out to the manufacturer of your particular 3D printer and source a replacement motor directly from them.

David
Post Reply

Return to “3D Printers & Printed Accessories”