Hi Rod,
Yep you were absolutely bang on the money. Thank you!!
I disconnected the THCAD Shield Pin to DC Ground, and that seemed to have solved it!
Managed to successfully cut a funny sign for a friends bar this evening!! (Image attached).
Can’t thank you enough Rod.
All the best,
Sean
SJDrummond's CNC Plasma Wiring Diagram
-
- 1.5 Star Member
- Posts: 27
- Joined: Fri Apr 30, 2021 6:37 am
- Location: Nottingham, UK
Re: SJDrummond's CNC Plasma Wiring Diagram
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Member
- Posts: 780
- Joined: Sun Aug 21, 2016 1:49 am
- Location: Brisbane, Australia
- Contact:
Re: SJDrummond's CNC Plasma Wiring Diagram
Awesome you got it done and you are cutting!
-
- 1.5 Star Member
- Posts: 27
- Joined: Fri Apr 30, 2021 6:37 am
- Location: Nottingham, UK
Re: SJDrummond's CNC Plasma Wiring Diagram
Hi all,
Apologies for not being on the forum in a while. I have fixed a couple of errors on the wiring diagram and will post the latest version below.
Changes:
- Removed the GND connection from the input side of the THCAD-5.
- I had the status LEDs connected all wrong, so have fixed those (I think). If anybody could take a look and confirm that would be amazing.
- Added a laser pointer connection.
All the best,
Sean
Apologies for not being on the forum in a while. I have fixed a couple of errors on the wiring diagram and will post the latest version below.
Changes:
- Removed the GND connection from the input side of the THCAD-5.
- I had the status LEDs connected all wrong, so have fixed those (I think). If anybody could take a look and confirm that would be amazing.
- Added a laser pointer connection.
All the best,
Sean
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Elite Contributing Member
- Posts: 1968
- Joined: Fri Apr 17, 2009 11:48 am
Re: SJDrummond's CNC Plasma Wiring Diagram
Nice diagram! Well done and glad to hear everything is working out ![Like :Like](./images/smilies/icon_new_like.gif)
![Like :Like](./images/smilies/icon_new_like.gif)