I have someone needing this made to match his current gate. Can anybody help me out.
Thank You
Bill Longiotti
need this horse converted
-
- 6 Star Elite Contributing Member
- Posts: 8935
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: need this horse converted
Bill - I think this one would benefit from a manual trace. I have sent you a PM.
David
David
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3191
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: need this horse converted
I dragged it into Paint 3D and then inkscape, to produce a .jpg. Then I imported it into DesignEdge and cleaned it up a bit. You might want to do more to it, but here is the file after 30 minutes of playing around ...
It occurs to me now that the bottom fillet of the lower bar is probably cropped from the original photo. I am sure you can make that adjustment!
Joe
It occurs to me now that the bottom fillet of the lower bar is probably cropped from the original photo. I am sure you can make that adjustment!
Joe
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
16 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
16 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 1/2 Star Member
- Posts: 9
- Joined: Mon Nov 10, 2008 11:58 pm
Re: need this horse converted
It looks super good. No it looks GREAT.
Thanks
Bill Longiotti
Thanks
Bill Longiotti
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3191
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: need this horse converted
I like to keep my skills sharp so I tackle stuff like this for the fun of it.
It isn’t a perfect match so if you need it to match exactly you’ll have to do a little bit of work to it.
Joe
.
It isn’t a perfect match so if you need it to match exactly you’ll have to do a little bit of work to it.
Joe
.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
16 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
16 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!