Entry way gate with mountain scenery
-
- 1.5 Star Member
- Posts: 38
- Joined: Wed Apr 22, 2020 9:22 pm
-
- 2.5 Star Member
- Posts: 108
- Joined: Tue Dec 17, 2019 6:28 pm
- Location: Utah (Nothern)
Re: Entry way gate with mountain scenery
Where is this? Reminds me of Park City Utah. Fantastic job. Looks great.
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Entry way gate with mountain scenery
Did you install also?
What hinges did you use?
OPening system?
What hinges did you use?
OPening system?
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 3.5 Star Member
- Posts: 538
- Joined: Thu Dec 05, 2019 11:33 am
Re: Entry way gate with mountain scenery
WOW! Awesome work. I am inspired seeing what a lot of you folks are doing. Thank you
-
- 1.5 Star Member
- Posts: 38
- Joined: Wed Apr 22, 2020 9:22 pm
Re: Entry way gate with mountain scenery
This is in Montana and yes I did install them. They Are lift master openers and I used weld on bullet hinges
-
- 3 Star Member
- Posts: 313
- Joined: Tue Jul 28, 2009 11:23 pm
- Location: Weiser, ID
- Contact:
Re: Entry way gate with mountain scenery
Very nice job! Do you have your own tubing roller? Or did you CNC it and weld it together? Nice shop btw.
-
- 1.5 Star Member
- Posts: 38
- Joined: Wed Apr 22, 2020 9:22 pm
Re: Entry way gate with mountain scenery
I do have an Edwards tube roller but it only goes to 2 3/4 inches so I had to cut it out with the CNC and weld it together. Lots of grinding
-
- 1/2 Star Member
- Posts: 1
- Joined: Tue Jan 12, 2021 1:01 pm
Re: Entry way gate with mountain scenery
I like how you did the center posts and end posts with the cope instead of dead ending the arch into them.
-
- 1.5 Star Member
- Posts: 45
- Joined: Mon Nov 09, 2020 3:33 am
Re: Entry way gate with mountain scenery
Very nice fab work!
-
- 2 Star Elite Contributing Member
- Posts: 77
- Joined: Sun Jan 03, 2016 2:46 am
- Location: Utah
Re: Entry way gate with mountain scenery
Very nice job....looks great!
Hypertherm Powermax 65
4'x 8' Eagle Plasma Table
AutoCad Civil 3D
SheetCam
Mach3
Lincoln MIG
Everlast 256S Combo Arc/TIG/Plasma
Millermatic 211
4'x 8' Eagle Plasma Table
AutoCad Civil 3D
SheetCam
Mach3
Lincoln MIG
Everlast 256S Combo Arc/TIG/Plasma
Millermatic 211
-
- 1/2 Star Member
- Posts: 3
- Joined: Sun Dec 13, 2020 5:40 am
Re: Entry way gate with mountain scenery
Can you break down how you'd go about pricing this job?
-
- 1.5 Star Member
- Posts: 38
- Joined: Wed Apr 22, 2020 9:22 pm
Re: Entry way gate with mountain scenery
LoL customer walks in to our shop tells me what they want I say I can do it. They ask how much I hand them a card with the shop managers number on it and tell them to give him a call and he will give them a quote. But typically something like these gates cost about 5000 without auto openers and around 10000 with auto openers and that includes us installing the gates and openers. We have done 30000 dollar sets of gates that were just gates but they were pretty extravagant.