Look for alternator mount
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Feb 29, 2012 1:19 pm
- Location: Shawnee oklahoma (bethel acres)
- Contact:
Look for alternator mount
Looking for some Sbc alternator mounts
-
- 4 Star Member
- Posts: 1008
- Joined: Mon May 21, 2012 3:58 pm
- Location: spanaway wa.
-
- 3 Star Member
- Posts: 311
- Joined: Fri Oct 31, 2014 8:50 am
- Location: East Tennessee
Re: Look for alternator mount
Have you tried Auto Zone? Just kidding, did you have something in mind like for a custom bracket or just a standard off the shelf one
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: Look for alternator mount
Jim, Small Block Chevy.... The old were terrible for breaking.
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: Look for alternator mount
Oh and here:
https://grabcad.com/library/tag/chevy
https://grabcad.com/library/tag/chevy
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Feb 29, 2012 1:19 pm
- Location: Shawnee oklahoma (bethel acres)
- Contact:
Re: Look for alternator mount
Was looking for something custom came up with this last night thank it's going to work
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Look for alternator mount
and he didn't post the file
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Feb 29, 2012 1:19 pm
- Location: Shawnee oklahoma (bethel acres)
- Contact:
Re: Look for alternator mount
Will post file tomorrow
-
- 2.5 Star Member
- Posts: 229
- Joined: Sat Apr 26, 2014 7:56 pm
Re: Look for alternator mount
I did this one for my brother in law's drag car, stemming from my first real use of "Scanything" I scanned his original POS which was broken and I had re-welded it several times, just too thin for his setup,
so I did this one as an upgrade to that one. after seeing his installation I made the adjuster bracket too...
so I did this one as an upgrade to that one. after seeing his installation I made the adjuster bracket too...
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Look for alternator mount
nice work kkroger, i like parts that are practical
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
-
- 2.5 Star Member
- Posts: 229
- Joined: Sat Apr 26, 2014 7:56 pm
Re: Look for alternator mount
Then you will like this one too _Ogre
He brought me this....
So I made him this
He brought me this....
So I made him this
- Poh
- 2.5 Star Elite Contributing Member
- Posts: 111
- Joined: Thu Jun 20, 2013 5:21 pm
- Location: Plumas County, Ca.
Re: Look for alternator mount
I have one like this, SBC mid mount long pump
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Poh, Stainless is Forever!!!
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
- Poh
- 2.5 Star Elite Contributing Member
- Posts: 111
- Joined: Thu Jun 20, 2013 5:21 pm
- Location: Plumas County, Ca.
Re: Look for alternator mount
I should say it should be cut out of .25", the smaller bracket goes in front of the waterpump mounting holes, and you may have to polish the housing down a bit for a perfect fit. I did anyhow.
Poh, Stainless is Forever!!!
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Look for alternator mount
nice work poh
thanks for the file
i wish we had the plasma table when i built my 58 truk
i would have done everything on the table
instead of cutting them out with the grinder and drill
thanks for the file
i wish we had the plasma table when i built my 58 truk
i would have done everything on the table
instead of cutting them out with the grinder and drill
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
- Poh
- 2.5 Star Elite Contributing Member
- Posts: 111
- Joined: Thu Jun 20, 2013 5:21 pm
- Location: Plumas County, Ca.
Re: Look for alternator mount
Thanks Ogre, My latest build is how I learned my software and table... If only I had it for the previous vehicles_Ogre wrote:nice work poh
thanks for the file
i wish we had the plasma table when i built my 58 truk
i would have done everything on the table
instead of cutting them out with the grinder and drill
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Poh, Stainless is Forever!!!
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
-
- 1 Star Member
- Posts: 10
- Joined: Thu May 31, 2018 9:13 pm
-
- 6 Star Elite Contributing Member
- Posts: 8934
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Look for alternator mount
Perhaps these drawings will help.
David
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 35
- Joined: Mon Aug 19, 2019 11:48 pm
Re: Look for alternator mount
What's up with the valve covers?Monty prince wrote: ↑Fri Feb 05, 2016 12:39 pm Was looking for something custom came up with this last night thank it's going to work
-
- 3 Star Elite Contributing Member
- Posts: 469
- Joined: Sun Oct 31, 2010 1:26 pm
- Location: Kannapolis,NC
- Contact:
Re: Look for alternator mount
Never did post that dxf....
CandCNC
Mach3
Sheetcam
Draftsight
Hypertherm 65 machine torch
Millermatic 210
Passport plus
Spoolmate 150
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl
Mach3
Sheetcam
Draftsight
Hypertherm 65 machine torch
Millermatic 210
Passport plus
Spoolmate 150
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl
-
- 3 Star Elite Contributing Member
- Posts: 469
- Joined: Sun Oct 31, 2010 1:26 pm
- Location: Kannapolis,NC
- Contact:
Re: Look for alternator mount
Got a layout on that power steering bracket?
CandCNC
Mach3
Sheetcam
Draftsight
Hypertherm 65 machine torch
Millermatic 210
Passport plus
Spoolmate 150
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl
Mach3
Sheetcam
Draftsight
Hypertherm 65 machine torch
Millermatic 210
Passport plus
Spoolmate 150
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl