Spare Parts? - Need Sensor Cable
-
- 1/2 Star Member
- Posts: 8
- Joined: Sun Jan 30, 2011 6:15 pm
Spare Parts? - Need Sensor Cable
Hey everyone, does anybody know if and where you can get a new sensor cable that runs from the control box to the plasma cutter? We have a CNC table and we are having some problems so just trying to eliminate all possibilities here. Thanks, Shana
-
- 1/2 Star Member
- Posts: 8
- Joined: Sun Jan 30, 2011 6:15 pm
Re: Spare Parts?
Also does anyone know where you can get bearings for torch travel on the gantry?
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 813
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Spare Parts?
You mean from the control box to the "table" right, not the plasma cutter. Either way, you might want to post what type of table and control box you have...
Mine has standard CAT5 cable that you just make yourself. Not sure what table you have. (mines a Practical CNC)
Mine has standard CAT5 cable that you just make yourself. Not sure what table you have. (mines a Practical CNC)
I think I'm the oldest 10 year old boy on the forum...
-
- 2.5 Star Member
- Posts: 123
- Joined: Wed Jul 08, 2009 4:57 am
Re: Spare Parts?
Bearings should be fairly easy to find as long as you have all the dimentions. Try McMaster Carr or Applied. they have great web pages that make it easy to find parts. As far as the cable, you should be able to go to your local computer store or repair shop and pickup a replavement.
Good Luck
Good Luck