Graveyard Carz tribute
- gtojim
- 1/2 Star Member
- Posts: 5
- Joined: Tue Jan 08, 2019 3:51 pm
Graveyard Carz tribute
Here is my latest creation, I will be shipping it to Mark Worman
===============================
Torchmate 4400 / Flexcut 80
https://www.facebook.com/Nuk-N-Futz-Met ... 571120852/
Torchmate 4400 / Flexcut 80
https://www.facebook.com/Nuk-N-Futz-Met ... 571120852/
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7807
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Graveyard Carz tribute
No problems there I'm sure he will love it, very creative work
How big was to original saw blade. Thanks for posting.
How big was to original saw blade. Thanks for posting.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- dgeorgester
- 2.5 Star Member
- Posts: 127
- Joined: Wed Oct 24, 2012 7:20 pm
- Location: Halifax, Nova Scotia, Canada
Re: Graveyard Carz tribute
One of my favorite shows.
- East German
- 4 Star Elite Contributing Member
- Posts: 584
- Joined: Sat Jan 05, 2013 8:21 am
- Location: Stapelburg Germany
Re: Graveyard Carz tribute
Yes
Very Nice
Very Nice
Sorry for my language! The last English class was in 1982.
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
- gtojim
- 1/2 Star Member
- Posts: 5
- Joined: Tue Jan 08, 2019 3:51 pm
Re: Graveyard Carz tribute
It was 30" diameter
===============================
Torchmate 4400 / Flexcut 80
https://www.facebook.com/Nuk-N-Futz-Met ... 571120852/
Torchmate 4400 / Flexcut 80
https://www.facebook.com/Nuk-N-Futz-Met ... 571120852/
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2648
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Graveyard Carz tribute
Great design work, love the coloring and the arch!
Larry
Larry
-
- 1/2 Star Member
- Posts: 3
- Joined: Thu Sep 29, 2016 10:29 pm
Re: Graveyard Carz tribute
that is wild!! great work
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: Graveyard Carz tribute
Looks cool!!!!!!!!!!!!!!!!!!!
-
- 3 Star Elite Contributing Member
- Posts: 319
- Joined: Thu Mar 31, 2016 2:51 pm
Re: Graveyard Carz tribute
Impressive very creative design. Can I ask how you went about centering your torch to the saw blade?
- SegoMan DeSigns
- 4 Star Member
- Posts: 858
- Joined: Sat Jan 06, 2018 4:45 pm
Re: Graveyard Carz tribute
Awesome design!
What I do when I need to do a cut in an existing piece is to incorporate the outer edge into the file, do a couple of dry runs for alignment. Turn on the torch to cut the inside pieces pause and remove part.
- gtojim
- 1/2 Star Member
- Posts: 5
- Joined: Tue Jan 08, 2019 3:51 pm
Re: Graveyard Carz tribute
I first set a zero position, then On my screen in visual designer I put the cross hairs in the middle of the drawing and then I lowered the torch head and lined up the saw blade to the exact middle, the hole was 6 inches across so I placed a grinder wheel in the hole to get the exact center, then I prayed to the plasma lords and hit "run"
===============================
Torchmate 4400 / Flexcut 80
https://www.facebook.com/Nuk-N-Futz-Met ... 571120852/
Torchmate 4400 / Flexcut 80
https://www.facebook.com/Nuk-N-Futz-Met ... 571120852/
-
- 3 Star Elite Contributing Member
- Posts: 319
- Joined: Thu Mar 31, 2016 2:51 pm
Re: Graveyard Carz tribute
Thank you both for the setup info, very helpful.
- Jonobrien78
- 1 Star Member
- Posts: 19
- Joined: Tue Sep 10, 2013 9:35 pm
- Location: Princeton, MN
Re: Graveyard Carz tribute
This is awesome. I love every part of it!
Precision Plasma LLC V-rail 4x8 table
CandCnC Electronics
Hypertherm Powermax 65
SheetCam
Mach3
CandCnC Electronics
Hypertherm Powermax 65
SheetCam
Mach3