Garden Stakes
- Sampson Jones
- 3 Star Elite Contributing Member
- Posts: 333
- Joined: Mon Jul 25, 2011 9:30 pm
Re: garden stakes
I am the original poster of "garden stakes " downloaded 311 times with ink burna font . With very few thanks you's . I've got a lot of good files from this site and some really bad ones . I can see why folks won't post some of their files , because of lack of appreciation for their hard work .
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: garden stakes
Totally agree and thankyou for the original post of these fine files and as I said previously I don't post near as much as I used to but its good to have the subject brought up and let some of the folks know that it is an issue.
Greg From Storiesnsteel
-
- 1/2 Star Member
- Posts: 9
- Joined: Wed May 15, 2013 2:08 am
Re: garden stakes
Thanks for the Garden Stakes guya!
-
- 2.5 Star Member
- Posts: 112
- Joined: Wed Oct 07, 2015 4:33 pm
Re: garden stakes
thank you! Hopefully I will find time to learn how to make my table work someday!
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
Re: garden stakes
well Keep the faith slewis64 it took me 2 yrs to get semi good and 2 more to get not bad lol
Greg From Storiesnsteel
-
- 2.5 Star Member
- Posts: 170
- Joined: Wed Nov 20, 2013 10:34 am
- Location: Louisiana
Re: garden stakes
Thanks gcw8 - I've been wanting some of these for a while. Appreciate the share!
-
- 2.5 Star Member
- Posts: 196
- Joined: Fri Jul 26, 2013 4:56 pm
- Location: northern california
Re: garden stakes
thank you for the share!
-
- 1 Star Member
- Posts: 10
- Joined: Sun Jan 29, 2017 12:04 am
Re: garden stakes
I love these thank you
-
- 2.5 Star Elite Contributing Member
- Posts: 126
- Joined: Thu Jul 23, 2015 10:10 am
- Location: Richland WA
Re: garden stakes
Thanks will make them for my daughter i law
-
- 1.5 Star Member
- Posts: 39
- Joined: Wed Jul 29, 2009 1:21 pm
Re: garden stakes
JOB WELL DONE,LOOKS FINE. ron
-
- 1 Star Member
- Posts: 14
- Joined: Sun Jan 29, 2017 6:28 pm
Re: Garden Stakes
Thank you - my wife will love these!
GEON, on the left coast...
Arclight Dynamics 6000 Pro 5x5
Hypertherm 65
Arclight Dynamics 6000 Pro 5x5
Hypertherm 65
-
- 2 Star Member
- Posts: 71
- Joined: Sat Oct 08, 2016 8:10 pm
Re: Garden Stakes
Thank you for the file. I will use these in my own garden.
-
- 1.5 Star Member
- Posts: 25
- Joined: Tue Jul 24, 2018 9:54 am
Re: Garden Stakes
Thank you! These will look great in the garden!
-
- 1.5 Star Elite Contributing Member
- Posts: 103
- Joined: Thu Nov 23, 2017 8:22 am
- Location: San Antonio, Texas
Re: Garden Stakes
thanks for the share, now need to setup the garden for them.
Cornelio
Cornelio
DHC2 Plasmacam Custom 7’ x 18’ Plasma Table, Hypertherm 85 Plasma Machine Torch, Miller 875 Plasma Torch, Lincoln Aspect 375 TIG, Lincoln 275 TIG, Miller 200, Lincoln 250 SMAW, Lincoln 256 MiG Spool Gun, Miller 211, Miller 210 MIG, Miller Trailblazer 302
- ETCWeld
- 3 Star Member
- Posts: 257
- Joined: Sat Dec 16, 2017 10:45 pm
Re: Garden Stakes
These will make some great gifts for the garners in the office. Thanks
-
- 1 Star Member
- Posts: 10
- Joined: Sun Aug 26, 2018 12:06 am
Re: Garden Stakes
Thanks. Now just to make a couple more for the other stuff in the garden, will post them when I get around to making them after vacation.
- ETCWeld
- 3 Star Member
- Posts: 257
- Joined: Sat Dec 16, 2017 10:45 pm
Re: Garden Stakes
I was just thinking after I sent that... If I make these they'll want what ever else they grow. I looked in my torchmate fonts and I couldn't figure out what you used.
-
- 1.5 Star Member
- Posts: 33
- Joined: Wed Nov 29, 2017 10:48 pm
- Location: Colorado
Re: Garden Stakes
Great idea, We did the a similar thing with ours but we use either pieces of welding rod through the holes or some other thing wire, Whatever we have lying around.
We have also made some that have a flat stake built in. We tried an automotive clear coat that allowed us to use the silver sharpies to write whatever we wanted as well and then clean it off with rubbing alcohol or nail polish remover.
We have also made some that have a flat stake built in. We tried an automotive clear coat that allowed us to use the silver sharpies to write whatever we wanted as well and then clean it off with rubbing alcohol or nail polish remover.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by ScottF on Tue Feb 12, 2019 11:49 am, edited 1 time in total.
I don't have all the answers but I do have a lot of opinions....
ShopSabre Sidekick 8 with water table
Hypertherm Powermax 85 w/machine and hand torches
IR 5hp 60 gal,+ 60 gallons of storage and aftercooler
Lincoln Square Wave 200
14x40 lathe
ShopSabre Sidekick 8 with water table
Hypertherm Powermax 85 w/machine and hand torches
IR 5hp 60 gal,+ 60 gallons of storage and aftercooler
Lincoln Square Wave 200
14x40 lathe
- ETCWeld
- 3 Star Member
- Posts: 257
- Joined: Sat Dec 16, 2017 10:45 pm
Re: Garden Stakes
great ideas. thanks
-
- 2.5 Star Member
- Posts: 176
- Joined: Sun Nov 26, 2017 8:03 pm
Re: Garden Stakes
Very nice, thanks for the time put into these.
-
- 2.5 Star Member
- Posts: 176
- Joined: Sun Nov 26, 2017 8:03 pm
Re: Garden Stakes
nice can't wait to cut!
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu Sep 20, 2018 12:20 am
Re: Garden Stakes
Would I be able to get your file from you if possible?
-
- 1/2 Star Member
- Posts: 5
- Joined: Thu Jan 10, 2019 12:39 pm
Re: Garden Stakes
Thanks for your time!!