Finished up a furniture store project today. I made and installed the pole sign and the facade. The pole sign is 25' tall, the circle is 10' diameter. The black is the back layer then the white stands 3" in front of that with the 'O' and couch cushion spaced 1.5" in front of that. White lights between the white and black layer and red lights behind the red layer. No pics of it lit yet but the facade is amazing at night!
Furniture Sign Project
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1176
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Furniture Sign Project
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
- WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: Furniture Sign Project
Very nice. Looks like quite a bit of work went into it. The night time picture is quite nice, congrat's on a job well done.
Steve
Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Furniture Sign Project
Nice job Robert.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 3 Star Elite Contributing Member
- Posts: 448
- Joined: Thu Jul 11, 2013 8:46 pm
- Location: NEW MEXICO
Re: Furniture Sign Project
Very impressive. Well done.
- dgeorgester
- 2.5 Star Member
- Posts: 127
- Joined: Wed Oct 24, 2012 7:20 pm
- Location: Halifax, Nova Scotia, Canada
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Apr 17, 2018 2:36 pm
Re: Furniture Sign Project
this looks great
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1176
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Furniture Sign Project
Thank you all, it was a fun project. I lit it up and am going to add some more white lights. It would look great except it's not nearly as bright as the facade and next to it, looks a little dim - good thing I used a large enough transformer to load it up with some more lights!
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Furniture Sign Project
Nice job! I actually think the facade is too bright, looks washed out. I think they should change theirs!!It would look great except it's not nearly as bright as the facade and next to it, looks a little dim
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1176
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Furniture Sign Project
I did that too That pic is one that someone took and posted to Facebook so it's not great quality. I have a better one I'll post that is a better representation of what it looks like. It's killer at night. I want the pole sign to match.tnbndr wrote:Nice job! I actually think the facade is too bright, looks washed out. I think they should change theirs!!It would look great except it's not nearly as bright as the facade and next to it, looks a little dim
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube