Here is a Snoopy mailbox topper that I recently did for a friend. The original DXF file was created by Stan at DXF Graphics. Permission was given to share on this site since it's not a graphic that he normally sells on his site. I hate that my first share is not a file that I actually created but at least I was a small part of the original idea.
If you plan to cut and use for a different type of project, you will need to ad his ear(s). I asked Stan to leave it off because my friend was going to paint the ear on each side of the mailbox. I took a picture of it before he had a chance to do that. He also mentioned possibly using some vinyl to make ears so they could flap around in the wind. Everything was made using 14 gauge including the brackets that I bent and welded up. The Snoopy was scaled and cut at approximately 14 inches long for the mailbox that it was mounted to.
Jeff
Snoopy Mailbox Topper
-
- 2.5 Star Member
- Posts: 113
- Joined: Sun Jun 03, 2018 2:22 pm
Snoopy Mailbox Topper
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
LDR 4'x4' Water Table
Command CNC Linux Controller
Plate Marker
Power Max 45xp w/ Machine Torch & Hand Torch
2 Stage filter, Motorguard filter & HF Ref Dryer
InkScape / SheetCam
Command CNC Linux Controller
Plate Marker
Power Max 45xp w/ Machine Torch & Hand Torch
2 Stage filter, Motorguard filter & HF Ref Dryer
InkScape / SheetCam
-
- 1.5 Star Member
- Posts: 38
- Joined: Tue Mar 06, 2018 5:00 pm
Re: Snoopy Mailbox Topper
Cool little Snoopy
-
- 1 Star Member
- Posts: 22
- Joined: Wed Apr 25, 2018 2:59 pm
Re: Snoopy Mailbox Topper
Can someone convert this to dxf
-
- 3 Star Member
- Posts: 329
- Joined: Wed Dec 26, 2012 6:13 am
Re: Snoopy Mailbox Topper
DXF attached.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Elite Contributing Member
- Posts: 56
- Joined: Wed Aug 19, 2009 6:01 pm
Re: Snoopy Mailbox Topper
Great idea.
Thanks
Ken
Thanks
Ken
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
- david jordan
- 3.5 Star Elite Contributing Member
- Posts: 671
- Joined: Sun Jul 06, 2014 2:21 pm
Re: Snoopy Mailbox Topper
Thank you.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
-
- 1 Star Member
- Posts: 12
- Joined: Sat Dec 06, 2014 2:00 am
Re: Snoopy Mailbox Topper
I've always loved Snoopy. This is fantastic!
-
- 1/2 Star Member
- Posts: 4
- Joined: Wed May 16, 2018 12:45 am
-
- 1 Star Member
- Posts: 17
- Joined: Fri Feb 27, 2015 4:34 pm
Re: Snoopy Mailbox Topper
Great idea.Thanks.