Hello,
I am interested if there is any feedback on the Torchmate 2 x 4 machine. I am new to the board, and would like to get more involved with metal cutting. Any feedback, good or bad would be appreciated.
Thanks,
Mike
torchmate 2 x 4
-
aicomp
- 2.5 Star Elite Contributing Member
- Posts: 233
- Joined: Wed Feb 02, 2011 5:15 pm
- Location: Santa Anna Texas
- Contact:
Re: torchmate 2 x 4
Hi,
There is a Torchmate board on Pirate 4X4 that has a lot of 2X4 info. Between this one and Pirate, you will find all you need. Here is the link:
http://www.pirate4x4.com/forum/forumdisplay.php?f=125
Hope this helps.
Mike
There is a Torchmate board on Pirate 4X4 that has a lot of 2X4 info. Between this one and Pirate, you will find all you need. Here is the link:
http://www.pirate4x4.com/forum/forumdisplay.php?f=125
Hope this helps.
Mike
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
-
jdh239
- 2.5 Star Elite Contributing Member
- Posts: 197
- Joined: Tue Jan 11, 2011 4:09 pm
- Location: Payson, Utah
Re: torchmate 2 x 4
I have a 2x4. Anything you want to know about it? I have posted a lot of youtube vids on it. Search for jdh239
----------------------------------------
ColdCreekWorks.com
ColdCreekWorks.com
