post prossesor in sheetcam for THC with Ohmic

SheetCam related questions and tips can be posted here
Post Reply
ironridge
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Sun Jul 15, 2018 5:56 pm

post prossesor in sheetcam for THC with Ohmic

Post by ironridge »

I running sheet cam and mach3. I have recently set up a ohmic sensor to use to detect top of sheet metal for my plasma prior to each pierce, and it works great. The only issue that I have now is since I change to post processor "Mach 3flame with THC" to do the zero ref. I can not go and run from a certain line number if something went wrong such as a miss fire on plasma in Mach3. Before I user just "mach3 " post processor and if I need to run from any line I could just pick run from line # and would start from there with no issues. Is there a better post processor I should be using? Thanks in advance for any help.
User avatar
East German
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 580
Joined: Sat Jan 05, 2013 8:21 am
Location: Stapelburg Germany

Re: post prossesor in sheetcam for THC with Ohmic

Post by East German »

Hello,

I also had the problem. Guilt was with me the G31for the touch off.
I use the G28.1that works with me!
Start from here is not a Problem.

Peter
Sorry for my language! The last English class was in 1982.

Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
ironridge
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Sun Jul 15, 2018 5:56 pm

Re: post prossesor in sheetcam for THC with Ohmic

Post by ironridge »

Thanks. How do I go about changing from the g31 to a 28.1. Is there a other post processor or you edit a post processor? New at this so unsure best way yet to change and try.
User avatar
East German
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 580
Joined: Sat Jan 05, 2013 8:21 am
Location: Stapelburg Germany

Re: post prossesor in sheetcam for THC with Ohmic

Post by East German »

Hello,

Post Processor DTHC-HYT-TAP_SoftPierce+Marker-rev 11J

from the CandCNC website is very good!

https://www.candcnc.com/downloads/

Peter
Sorry for my language! The last English class was in 1982.

Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
Post Reply

Return to “SheetCam”