Hey guys & gals!
First time contributing! I was requested to make deadpool for someone so I drew him up. He cuts best at 20+ inches in height!
I cut him out of 16 gauge cold rolled. I'm still kind of new to this so it may not be the best, but thought someone may like him
Deadpool
-
- 1/2 Star Member
- Posts: 4
- Joined: Mon Mar 12, 2018 9:44 am
Deadpool
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Michelle
Hypertherm 45xp
Hypertherm 45xp
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2649
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Deadpool
Nice! Thanks for sharing.
Larry
Larry
-
- 4 Star Elite Contributing Member
- Posts: 1985
- Joined: Fri Apr 17, 2009 11:48 am
Re: Deadpool
This is cool. Thanks! My son will love it!
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7809
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Deadpool
nicely done, if you really wanted it to POP you could explode the drawing and cut separate parts, paint them like you did but attach them in layers.
attached is a sample not completely finished but should give you the Idea.
attached is a sample not completely finished but should give you the Idea.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1/2 Star Member
- Posts: 4
- Joined: Mon Mar 12, 2018 9:44 am
Re: Deadpool
Thanks for that! I hadn't thought of doing it in layers, and that would probably make the painting process easier as well!
acourtjester wrote:nicely done, if you really wanted it to POP you could explode the drawing and cut separate parts, paint them like you did but attach them in layers.
attached is a sample not completely finished but should give you the Idea.
Michelle
Hypertherm 45xp
Hypertherm 45xp
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7809
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Deadpool
Here are some examples of one I did, I also have a video tutorial showing how I did in with Inkscape I can send via the Google drive. You can do the same lettering for signs. If you want it PM me your email address (Yahoo address will not work,)Yahoo and Google do not play nice with each other )
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 5 Star Elite Contributing Member
- Posts: 2616
- Joined: Thu Jul 24, 2008 11:15 am
Re: Deadpool
NICE work ACJ. Love the layered technique!
-
- 1 Star Member
- Posts: 12
- Joined: Mon May 28, 2018 9:39 pm
Re: Deadpool
That's awesome. Did you glue the layers on?
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7809
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Deadpool
I use 3 different ways to attach the parts to the background. There is an adhesive called Goop (home depot, Lowe's) it is very sticky and flexible.
I have used a super glue that is a medium consistency and I have used a double sided tape (cell phone screen attachment tape) like this pick your width.
https://www.ebay.com/itm/25M-RED-Adhesi ... +scre.TRS0
I have used a super glue that is a medium consistency and I have used a double sided tape (cell phone screen attachment tape) like this pick your width.
https://www.ebay.com/itm/25M-RED-Adhesi ... +scre.TRS0
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT