Corvette Outline

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
towman1002
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Mon Aug 29, 2016 8:43 am

Corvette Outline

Post by towman1002 »

need to convert this if possible..just an outline

Image
towman1002
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Mon Aug 29, 2016 8:43 am

Re: needing help again

Post by towman1002 »

i do not have a converter
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1158
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: needing help again

Post by rdj357 »

Check out Inkscape, it's a free one.
corvette3.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

towman1002
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Mon Aug 29, 2016 8:43 am

Re: needing help again

Post by towman1002 »

i will..thank you.ive read where people have used it but never tried it
towman1002
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Mon Aug 29, 2016 8:43 am

Re: needing help again

Post by towman1002 »

i downloaded it and its extremely blockey
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1158
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: needing help again

Post by rdj357 »

Considering your entire image was 390 pixels wide x 77 pixels high, I thought it turned out pretty good lol. You can manually trace it in Inkscape pretty easily if you need a smoother drawing.

Here's a pic of the attached DXF.

Image
AdrianH
2 Star Member
2 Star Member
Posts: 87
Joined: Tue Dec 27, 2016 1:08 pm

Re: needing help again

Post by AdrianH »

Opens up fine in Qcad, I guess the issue could be your program to open the dxf.

Adrian
towman1002
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Mon Aug 29, 2016 8:43 am

Re: needing help again

Post by towman1002 »

i use autocad lt
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”