Jeep/ VW Flower Planters

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
User avatar
d2day
2.5 Star Member
2.5 Star Member
Posts: 114
Joined: Wed Sep 17, 2014 7:59 pm

Jeep/ VW Flower Planters

Post by d2day »

These projects were for my wife, as we all know happy wife happy life...

Jeep Rubicon...plasma cut sides, back and front, welded all the pieces together and painted. Added wheels, axles, and tires for a more realistic look. The fender and side flares were the most difficult part. It is 35" long x 14 inches tall x 14" wide. It might make a good fire pit...if made from heavier metal..... :mrgreen: Note: the tires are actually 6" schedule 40 black pvc pipe, I used the pipe to scale everything up to size so the piece would be correct.

The VW is made from a recycled water tank. Plasma cut windows for the front back and sides, welded in place and painted. The bumpers and wheels were added for realism. It is 23"x 18". The tires on it were rolled from metal and the "mag rims" were plasma cut and welded to the "tires". Hand cut the holes in the tank with plasma, too hard to do with a cutoff wheel.
Attachments
VW.jpg
VW.jpg (48.11 KiB) Viewed 1269 times
Jeep2.jpg
Jeep2.jpg (83.45 KiB) Viewed 1269 times
Jeep 1.jpg
Jeep 1.jpg (99.71 KiB) Viewed 1269 times
Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
User avatar
d2day
2.5 Star Member
2.5 Star Member
Posts: 114
Joined: Wed Sep 17, 2014 7:59 pm

Re: Jeep/ VW Flower Planters

Post by d2day »

With flowers
Attachments
VW2.jpg
VW2.jpg (50.32 KiB) Viewed 1266 times
Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Jeep/ VW Flower Planters

Post by little blue choo »

AWESOME!

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
sbest1
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 628
Joined: Fri Jan 16, 2009 10:26 pm

Re: Jeep/ VW Flower Planters

Post by sbest1 »

Well Done
Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”